Strange stick reaction / DJI Pro 4 questions

[RockerKevin]

When I forward and up, my drone rotates. I've done the controller calibration. Any other ideas?

 

[Deleted member 62848]

When I forward and up, my drone rotates. I've done the controller calibration. Any other ideas?

Try doing stick calibration,,it does input movements it's in rc settings

 

[AeroMirage]

Are your sticks set to mode 2? That is the default and 'normal' setting. There are 4 different configurations.

 

[Deleted member 62848]

When I forward and up, my drone rotates. I've done the controller calibration. Any other ideas?

click on remote calibration,,it tells you to turn ac off and follow other prompts it tells you

 

[RockerKevin]

Try doing stick calibration,,it does input movements it's in rc settings

I can't find stick calibration anywhere.

 

[RockerKevin]

Are your sticks set to mode 2? That is the default and 'normal' setting. There are 4 different configurations.

Yes; they are in mode 2.

 

[RockerKevin]

View attachment 80140 click on remote calibration,,it tells you to turn ac off and follow other prompts it tells you

Did that.

 

[RockerKevin]

Do settings made in DJI Go 4 take effect in Litchi and vice versa?

 

[Deleted member 62848]

Do settings made in DJI Go 4 take effect in Litchi and vice versa?

Good question not sure I been okay on djigo 4 haven't used litchi ...not sure on stick movement..still stratching my head

 

[tevek]

Do settings made in DJI Go 4 take effect in Litchi and vice versa?

Your RTH and Max altitude settings are effected in the dji go app as are most of the calibration settings. Your controller calibration is through the dji app.

 

[RockerKevin]

Yes; they are in mode 2.

Actually, it was in mode 1!
Every time I set it to mode 2 / apply / back - it resets to mode 1.
If I x out, it stays in mode 2; but then I can't get back to the previous menu.
WTF.

 

[RockerKevin]

Same problem with ALL settings in DJI Go 4!
If I X out, the setting stays; but if I go back, the setting resets.

 

[RockerKevin]

So, apparently you can't make settings adjustments while the drone is off. That's just silly.

 

[tevek]

So, apparently you can't make settings adjustments while the drone is off. That's just silly.

I'm thinking differently, the package must be powered up for the settings to stick so that the changes are retained. You need the same set up to review your current settings so it makes perfect sense. I used to run two different quads on the one device and my expectations of each were completely different.