This isn't my first go around with this remote. A year ago I noticed my remote wasn't taking a charge past 2 (out of 4) lights. I contacted DJI about the controller (not covered by the extended care) and was advised to purchase a new one. Feeling a bit burned by DJI I read several forums about this issue and came to the conclusion that this was more than just a isolated problem. It seems that lots of people had contacted DJI about this with no resolve. There were several forums I had read about how to do the repair to the unit too. I contacted my computer guy to see if he could do the suggested repair that included using a hot air solder gun to re-establish the connections on the boards. It worked for the short term and my controller was taking full charges again. No problem. Well after about 5 charges to the unit I'm right back to the unit not taking charges. THIS IS REALLY FRUSTRATING! It seems that DJI should step up and take some responsibility with this. I'm looking for anybody who can give me a tip on what other fix this might need or a source for somebody who fixes these things. Many thanks in advance!