problems after update p2v+ software

[yoyo asturias]

hi, i´m new here and please forgive my english writing.

need help after update to versión 3.14

calibración without problem, only thing is that the cámara died,
i can take pictures but in one posición....
I have to change posición by hand.....

also i noticed two things;

first, in the program i cannot see anymore the ZEN IMU ....

second, the camera in the program has a White color and not the same as i have,
mine is silver color ,....

please help me ...

 

[yoyo asturias]

also problem is that the software now is phantom visión 2 and not the "plus" versión.....
can anyone give me the link to the "plus" versión .......

 

[yoyo asturias]

nobody can help me ?

 

[mad in nc]

Welcome to the site......

Assuming you have a PC.... try re-loading from the start again... delete all programs from PC, re-download etc. from DJI site. Including the smartphone.

Start WinDriver first, then Asst. it will show Phantom 2 -> then plug in the Phantom where it should update to Phantom 2+

When in Asst make sure the right controller is checked (basic or upgraded).

It took me two time to upgrade to 3.12

 

[AzDroner]

The software is near the bottom of this page. I don't know about your other problem.
http://www.dji.com/product/phantom-2-vision-plus/download

 

[yoyo asturias]

Welcome to the site......

Assuming you have a PC.... try re-loading from the start again... delete all programs from PC, re-download etc. from DJI site. Including the smartphone.

Start WinDriver first, then Asst. it will show Phantom 2 -> then plug in the Phantom where it should update to Phantom 2+

When in Asst make sure the right controller is checked (basic or upgraded).

It took me two time to upgrade to 3.12

thank you so much, so I have to delete first all dji from my pc.....
i´l be back son to tell you the results

greets from spain

 

[yoyo asturias]

deleted driver and assist and installed again...... but again the visión versión and not the visión +

first i installed the driver tan the assist......

I used the link who was written here.....

also I still can´t see the ZEN IMU part in de update part.....