Having a problem with connecting to the Phantom Vision. Everything is fully charged. I bring the app up on my phone and connect with the wifi and then I tap the camera icon on the menu, it goes to the next screen that is black and not showing image, the wifi symbol is blue for about 2 sec. then turns to gray. The battery symbol shows 0 percent and it's showing no memory card. ( there is a card in the camera ) not sure if its a camera issue or software. made one flight and then this happened.
( When it was connected for the first time there was a live image from the camera, now all there is is a black screen )
Forgot to mention earlier that with the black screen it flashes " Phantom 2 Vision Connection "
I have a similar problem, but mine has never done it before, i have used it for a bout a month and no issue, but yesterday, i took it up and on the way down, no warning lights or anything sounded, but if fell out of the sky, from 35m and just said "phantom connection broken" but thats for the app the controller usually works, but as it was falling i had no imput from the controller, and when i ran over to it the battery was out 2cm max and the lights were still on, i turned it off and tried to reconnect wifi but woundnt. Today i cleaned it up and charged everything up and went to fly, firstly it took unusually long to connect and when it was connected it only showed the live feed and wifi range extender battery, but not phantom battery or satelites, and then it said i had no sd, but i did, then it showed fight data,the altitude etc for almost 2 seconds, then went away. Then it lost connection, then regained it, did this for a little bit, then lost it completely, and wouldnt connect agian, but i took the drone up, and it flew prefectly, but no camera or wifi/flight data as stated....
PLEASE HELP, could it have been interferance from a 5.8g thing, to make th controller not work, or as it landed knocked something out, like a connector or something???