- Joined
- Feb 12, 2014
- Messages
- 147
- Reaction score
- 0
I originally posted thinking this was an interference issue.
But it now looks like after 5 or 10 mins the Phantom 2 looses contact with the RC Transmitter, and goes into fail safe, and auto lands.
If I reboot on the spot, it stays in failsafe and the receiver light under the Phantom 2 stays red.
I'm not sure if this is caused by a Transmitter or Receiver problem, or whether the LED right in the middle of the Phantom 2 can mean something else if its red not green.
Leaving both the TX and the Phantom to cool down seems to fix it for a while.
Whatever is the problem seems to occur even if I don't fly the Phantom, just leaving both the TX and the Phantom turned on seems to do it.
I've yet to establish if its the TX or the Phantom
Note. I've only had the Phantom 2 for a couple of weeks and the TX and RX have always been a bit dodgy but I thought initially it was wifi or other interference, But I don't now think thats the case
Can anyone shed any light on his problem.
But it now looks like after 5 or 10 mins the Phantom 2 looses contact with the RC Transmitter, and goes into fail safe, and auto lands.
If I reboot on the spot, it stays in failsafe and the receiver light under the Phantom 2 stays red.
I'm not sure if this is caused by a Transmitter or Receiver problem, or whether the LED right in the middle of the Phantom 2 can mean something else if its red not green.
Leaving both the TX and the Phantom to cool down seems to fix it for a while.
Whatever is the problem seems to occur even if I don't fly the Phantom, just leaving both the TX and the Phantom turned on seems to do it.
I've yet to establish if its the TX or the Phantom
Note. I've only had the Phantom 2 for a couple of weeks and the TX and RX have always been a bit dodgy but I thought initially it was wifi or other interference, But I don't now think thats the case
Can anyone shed any light on his problem.