Here goes, phantom 4 rarely gets used but had to take it out last week, did the updates and tried to take pictures of a lot where my son was having a church built. when I came back to view the pictures it showed the pictures tried to take but all were blank, the videos that I took were all good . I don’t even know where to start. Is there any kind of diagnostic tests or calibrations. All I saw was gimbal calibration. Any help would be appreciated, sitting here now on the couch with it taking pictures and changing settings but still all blank. Video works and shows great quality
Phantom 4 camera inop
- Thread starter Damnnickname
- Start date
I don't know if blank is black or white? Sounds like you're getting too much light or not enough. Check your ev settings. Are you in manual or auto mode? Look it over good.
- Joined
- Oct 8, 2018
- Messages
- 10
- Reaction score
- 7
- Age
- 76
I fly a Phantom 4 Standard and have been experiencing an issue with the Camera. When flying over water and taking aerial photos of land surrounded by water, then down load the photos, there are red and green dots in various places. I have cleaned my lenses and have changed the camera setting to address the conditions of the subject (Day or Night - Light or dark). I still get the Red & Green Dots. Has anyone else experienced this problem and if so, how did one fix it. Thank you
It would be polite to start a new post for your problem. Change the flat ribbon cable on your gimbal. Your dots will be gone.
I’m not sure about your fix. Try taking a still using different methods, from app and remote controller.?
- Joined
- Oct 8, 2018
- Messages
- 10
- Reaction score
- 7
- Age
- 76
Thank you for your help and suggestion. I will be polite to start a new post, I did not mean to go on another post. I am new to posting. Thanks again
