It was my first time flying the drone and I flew it fine. When i landed on the ground, I had pulled the levers to both corners to power off the propellers but the dji tipped over and kept spinning. One of the blades got chipped/broken off and all blades kept spinning while it was tipped over. It eventually turned off by itself after 10 seconds and I don't know how. I changed out the propellers and powered the phantom back on by pressing power button once and holding it down for 2 secs. I hear one click noise and all lights blink and that's it. It wouldn't power on. I repeated the steps and it kept doing it. Removed battery and put it back in and tried again and still no luck. Please help me! This is the new version 2 with the updated motors and controller.