phantom 2 vision plus 3.0 shell

[andrewkaosmotocross]

does anyone know if the top shell is the same from the phantom 2 to the vision plus? ive bought a vision and the ends are cracked

 

[captainmilehigh]

I'd say yes.....

The identifier dji-phv-p08 refers to the DJI Phantom 2 Vision & Vision+ Body Shell (often listed as Manufacturer Part 8). It is an original equipment manufacturer (OEM) upper and lower plastic casing designed specifically to replace or rebuild damaged quadcopter shells for the classic Phantom 2 series.

Key Details & Compatibility

• Compatible Models: Fits the original DJI Phantom 2, Phantom 2 Vision, and Phantom 2 Vision+ quadcopters.
• Material: Lightweight, rigid molded plastic to protect the internal flight controller, battery, and electronic speed controllers (ESCs).
• Availability: Because the Phantom 2 is an older generation, this specific part is generally considered discontinued by most primary retailers.

 

[andrewkaosmotocross]

you sir are a hero, it come with a replacement bottom which im gonna attempt to change shortly, then i noticed the screw on the top is done so ill now chase a top, thanks for the info

 

[captainmilehigh]

you sir are a hero, it come with a replacement bottom which im gonna attempt to change shortly, then i noticed the screw on the top is done so ill now chase a top, thanks for the info

You are very welcome.....hope it all works out.

Take your time swapping out everything. I'd recommend also that any bench-testing after the swap out be done with the props OFF the bird, to be safe......

 

[crash1sttime]

does anyone know if the top shell is the same from the phantom 2 to the vision plus? ive bought a vision and the ends are cracked

exactly the same the tricky part is getting the camera wiring through the hole, if you are in the uk i have a shell in good condition