So yeah I had crashed my drone into a tree. And damaged all gimble wires. So I replaced all the wires running to the gimble . Then I took off the prop guards and damaged my motors cause the screw were to long. So when i turned on the motors they were acting all retarded. So i went and baught mn2214 tmotors and i hooked those up. So to make a long story longer, i turn on the remote i connect my phone i turn on my p3s and i go to the app. I tap the bar up top to check system says everythings good to go lol. So i motion to start the engine and on the app it says im in flight, but the motors are doing nothing lol. And when i use the throttle sticks it moves the camera instead of doing anything to the motors. It says im in flight mode 2. My front lights are a solid red & my back ones are flashing yellow. Im confused but i believe its the esc although under the status on the app it says the the esc is normal. Any help would be appreciated. Thatks a bunch.
Last edited: