Hello everyone, so I have a Phantom 3 Standard. I recently crashed it and broke the yaw arm on the gimbal. So I bought the kit to replace the arm and bought the official DJI ribbon cable for the gimbal. Did the replacement everything went well. Went to fire it up and test it and the RC has lost connection to the AC and I have no video feed. RC has solid red light. AC flashes yellow on arms and solid green on gimbal.
I have tried reconnecting using the DJI app and reset button on the AC and also turning the gimbal dial and flipping the s2 button and then hitting the rest on the AC both methods fail. I have also tried updating the firmware and it fails. First time it took about 5 minutes to fail now every time I try it fails in under a minute.
I am at a complete loss and have no idea what else to do.
Any one have some advice or help to offer?
I have tried reconnecting using the DJI app and reset button on the AC and also turning the gimbal dial and flipping the s2 button and then hitting the rest on the AC both methods fail. I have also tried updating the firmware and it fails. First time it took about 5 minutes to fail now every time I try it fails in under a minute.
I am at a complete loss and have no idea what else to do.
Any one have some advice or help to offer?