P2 H3-2D Screw size M2. 5*5 does not fit

[djiatl]

Anyone else have a problem with the M2. 5*5 screws not fitting in the mounting holes in the dampener?

This is the mount that came with the P2.

 

[Ksc]

you're using the m2 screws to connect the zenmuse to the mount and the m3 screws to connect the mount to the phantom, right?

http://download.dji-innovations.com/dow ... _Guide.pdf

 

[djiatl]

That is correct. The unthreaded "spacer" on the m2 screws is a bigger circumference than the drilled hole in the dampening mount. Basically the screw heads do not sit flush.

See photo: http://flic.kr/p/j4BkZ2

 

[djiatl]

Called DJI - apparently the "black" screws are to be used when connecting the vibration dampener to the gimbal.. (not the M2. 5*5). I never even used the M2. 5*5 screws

Mounting the vibration plate to the gimbal used the black M2. 5*6.3.

Mounting the vibration plate to the P2 used the M3*5.

Mounting the GoPro strap used the M2. 5*6.3 as well (since the M2. 5*5 head was too big).

All came together and looks right.

Photo of screws included: http://flic.kr/p/j4Vx2f

Mounted: http://flic.kr/p/j4TmGc