- Joined
- Dec 27, 2015
- Messages
- 2
- Reaction score
- 0
After updating firmware a few months ago, my live video feed stopped working and has never come back online since. Everything else seems to work perfectly.
I ping'd the wireless extender and it is talking. I ping'd the TOP and BOTTOM PCB board of the WiFi module and only the TOP is responding. When I look at what things are broadcasting wireless signal, only the phantom seems to be sending a signal, as when I turn it off, the signal drops off. If I turn off the extender, then no signals disappear. The only signal I can find when everything is turned on and bound together is the DJI innovations wireless signal that I named...
So, is it the 100$ extender or the 189$ wifi module that needs to be replaced?
The directions I used to ping the wifi card can be found at :
RC Groups - View Single Post - DJI Phantom 2 Vision+ Plus 2.4ghz Wifi Module - wiring diagram / camera connection
How to diagnose broken DJI Phantom 2 Vision+ Wi-Fi FPV module:
Thank you
Walter
I ping'd the wireless extender and it is talking. I ping'd the TOP and BOTTOM PCB board of the WiFi module and only the TOP is responding. When I look at what things are broadcasting wireless signal, only the phantom seems to be sending a signal, as when I turn it off, the signal drops off. If I turn off the extender, then no signals disappear. The only signal I can find when everything is turned on and bound together is the DJI innovations wireless signal that I named...
So, is it the 100$ extender or the 189$ wifi module that needs to be replaced?
The directions I used to ping the wifi card can be found at :
RC Groups - View Single Post - DJI Phantom 2 Vision+ Plus 2.4ghz Wifi Module - wiring diagram / camera connection
How to diagnose broken DJI Phantom 2 Vision+ Wi-Fi FPV module:
- turn on vision+, extender, smartphone, dji vision app, see blank live video screen
- using notebook/pc connect to Wi-Fi network "Phantom_xxxxx"
- ping 192.168.1.2
If ping succesfull, your wifi-extender is alive and can connect to Phantom's Wi-Fi (binding is ok). If ping fails - go no further, you are doing something wrong. Take a pause, drink coffee, think about getting some background in networking technologies, windows, etc (joke). - ping 192.168.1.1
If ping succesfull, TOP PCB board of Wi-Fi FPV module is alive - ping 192.168.1.10
If ping succesfull, BOTTOM PCB BOARD of WI-Fi FPV module is alive.
If ping fails - bottom PCB board (marked WM301_DM368) is broken
Thank you
Walter
Last edited: