I tried Maps Made Easy for the first time today, and had a problem with the Phantom 4 not following the planned grid.
I was only trying to do about 4 acres as a test.
The drone went from home to point one, then travelled at less than one mph, for about a third of the first leg, and the altitude was steady climbing. Altitude was set for 120 ft, and by the time it had flown 75 feet of the first leg, it was at 430 ft, and I brought it down manually.
I tried this 3 times, with a fresh map each time and the results were consistently bad.
I am flying a Phantom 4, latest firmware, and using an iPad mini2 with the controller. Flying in P mode.
Appreciate any advise, or help.
Sent from my iPad using PhantomPilots
I was only trying to do about 4 acres as a test.
The drone went from home to point one, then travelled at less than one mph, for about a third of the first leg, and the altitude was steady climbing. Altitude was set for 120 ft, and by the time it had flown 75 feet of the first leg, it was at 430 ft, and I brought it down manually.
I tried this 3 times, with a fresh map each time and the results were consistently bad.
I am flying a Phantom 4, latest firmware, and using an iPad mini2 with the controller. Flying in P mode.
Appreciate any advise, or help.
Sent from my iPad using PhantomPilots