When the weather clears up i am going to be experimenting with some ultra low altitude LP shots and see how it turns out. Ill be adding a 4th row just outside the view of the props. Ill let you guys know.
What was your height Michael?One more from a few hours ago.
Love these!
![]()
Sounds like a setup...What was your height Michael?
Can u do this from the go app and then into the gui software or do you need auto pilot or litchi then into the gui software
I would like to know because I'm close to test little planet on the beach too and i like his setup of half sea and half city...that's why i asked the height...if I've to bet is 50-60mtSounds like a setup...
Sent from my iPhone using PhantomPilots mobile app
Yeah, apparently the spherical panorama setting is the easiest way to do it from Litchi. I guess you can manually take panoramic shots and have the software stitch them together as well.Can u do this from the go app and then into the gui software or do you need auto pilot or litchi then into the gui software
make sure you post results here!That's awesome. I really want to do one this weekend
stoked to see these results!When the weather clears up i am going to be experimenting with some ultra low altitude LP shots and see how it turns out. Ill be adding a 4th row just outside the view of the props. Ill let you guys know.
5' 7" last I checkedWhat was your height Michael?
It only looks like I was above 400, I swear.Sounds like a setup...p
Hey everyone,
If any of you are into this concept, post your little planets in this thread! I'd love to see them!
I've finally managed to capture my first one. Taken using Litchi above Trafalgar Square, London and stitched in PTGui Pro from 26 images. The app is actually really simple to use and offers a nice variety of ready presets, including little planets. There's a free trial so give it a try!
It's worth noting that it took Litchi well over 3 minutes to capture the shots... I wonder if any other software out there handles it faster?
![]()
Paul
Sent from my iPhone using Tapatalk
That's awesome man. Please give info. on creating this. Did you use DJI or Litchi to capture the images? If Lichti what pano mode were they taken in? Thanksanother perspective of my last spherical pano:
SkyPixel - Connecting Creativity
That's awesome man. Please give info. on creating this. Did you use DJI or Litchi to capture the images? If Lichti what pano mode were they taken in? Thanks
I purchased Litchi from the iOS App Store in America. What/where are you searching?Aloha
When i go to the app store I find none of the apps mentioned are available? I get a not saying "not available in the US"
So, since I really want to make these cool shots what can I do?
Thanks
What aspect ratio were the source pictures shot in? I'm wondering if it takes longer for litchi to shoot the sequence if you have RAW + jpeg selected vs. just RAW. I assume your capture format was RAW in highest resolution?Hey everyone,
If any of you are into this concept, post your little planets in this thread! I'd love to see them!
I've finally managed to capture my first one. Taken using Litchi above Trafalgar Square, London and stitched in PTGui Pro from 26 images. The app is actually really simple to use and offers a nice variety of ready presets, including little planets. There's a free trial so give it a try!
It's worth noting that it took Litchi well over 3 minutes to capture the shots... I wonder if any other software out there handles it faster?
![]()
Paul
Sent from my iPhone using Tapatalk
Thank you very much for taking the time to explain this. I really appreciate it.I've been test running litchi the past two days but have had three RC disconnects & think I'll be flying solely with Go from here on out. The process is automated in litchi, but all it does is hover over a center point, look straight ahead, take 8-12 consecutive shots turning 30-45 degrees each time until you reach the starting position, lower your gimbal 30-45 degrees & repeat the process, lower your gimbal & repeat again until you're looking straight down. litchi takes two photos straight down, 180 degrees apart for cleaner blending & I definitely recommend this step as well.
After this you have to stitch the images together & there are a bunch of different ways to do so. I initially used Photoshops auto-align function which works, but cannot be tweaked to perfection. PTGui is another option & is pretty incredible but will cost you about 100 bucks. It allows you to pick what are essentially anchor points in overlapping images that help align the panorama to near perfection & it will also auto blend the layers. There's a free trial that is perfectly functional but they overlay a gnarly watermark over the image. A free option is Image Composite Editor which is a free Windows Research program & personally, I think this should be worth a decent chunk of change as well. It works just as fast as PTGui, but offers slightly less customization. This program will stitch & blend as well & offers a dozen different pano layouts aside from standard flat panorama e.g., spherical, cylindrical, perspective, etc.
For this particular process, skypixel requires a 360 pano in a 2:1 aspect ratio so I used PTGui to stitch the shots together & imported to Photoshop to raise the top edge of the canvas to make the height half the size of the width. Then I filled the sky & blended it to the panorama.
easypano.com will do the same thing as skypixel but offers a few other neat features that I have yet to toy with:
VR 360 Virtual Tour // Delray Beah, FL
hope this helps!
We use essential cookies to make this site work, and optional cookies to enhance your experience.