Does not matter if it is in F mode and doing waypoints. Will it finish the waypoints and then return to home or just come home before completing waypoint if out of range?It returns to the homepoint after loosing your signal.
I am not sure what you mean by "Standard its on RTH", if you create a waypoint mission, say a straight line one mile from the RC's position and the last point is at that one mile point it will NOT RTH unless you manually set the "Finish Action" in the Mission Settings to either 1.None 2. Go Home 3. Land 4. Back to First Waypoint , if you don't set one of these actions to finish your mission it will stay where it is, of course if it is out of range of the RC, I believe then it should RTH automatically, but why would you ever take that chance..Standard its on RTH, but to be on the save sight its a good idea to make the last waypoint near you ore the rc.
That is correct.So also to clarify the original posters first question in their first post, if you run a waypoint mission, litchi will program the phantom to complete the mission, hence the reason to be careful on where you end that mission and my suggestion above that you end it close by the RC
NOT correct. It will only do exactly what the mission is configured for it to do. There is NOT a "default RTH" at the end of a mission.Like you said one line, it will auto RTH when the mission is on its end
That is correct.
A well planned waypoint GS mission will end near where it started based upon the waypoint entries (presumably where the pilot is still located)... or as noted configure the mission settings finish action to be either "None", "Go Home", "Land" or "Back to First Waypoint" depending on the desired outcome.
While a waypoint GS mission is actively running, any loss of connection to the RC will be ignored and NOT trigger the RTH function...
Sorry but that is not correct, unless you set the finish action to go home, by default it is set to None.True it will finish her mission. And than come home.
Sorry but that is not correct, unless you set the finish action to go home, by default it is set to None.
Sent from my Nexus 6 using Tapatalk
Indeed, quite strange... on Android, every waypoint GS mission I've ever created the default "finish action" defaults to "None".Maybe I've got a dutch version but mine is by default on RTH, also on the IOS version, strange.