- Joined
- Aug 24, 2015
- Messages
- 13
- Reaction score
- 1
- Age
- 57
So my Phantom Vision 2+ had a pretty hard landing the other day and I assume that's the cause of my problem. The micro sd card slot on the gimbal now won't accept a card. It's goes in half way then jams, like the slot is obstructed or crushed out of shape.
I've taken off the gimbal-camera assembly but to get at the controller board itself I need to unscrew four tiny Philips screws to remove the casing which I can't do, the tiny screwdriver just slips out of the slots and I don't want to force it.
Is it possible to get replacement controller boards? Can't see any on Ebay. Or should I go for a cheap Go pro gimbal to replace it such as this one: CNC FPV BGC 2 Axis Brushless Gimbal w/ Controller for GoPro 3 DJI 1 Silver UK
I've taken off the gimbal-camera assembly but to get at the controller board itself I need to unscrew four tiny Philips screws to remove the casing which I can't do, the tiny screwdriver just slips out of the slots and I don't want to force it.
Is it possible to get replacement controller boards? Can't see any on Ebay. Or should I go for a cheap Go pro gimbal to replace it such as this one: CNC FPV BGC 2 Axis Brushless Gimbal w/ Controller for GoPro 3 DJI 1 Silver UK
