Hello there
I just bought the DJI groundstation to use it with a PC
I have installed the drivers and programs from the companion installation CD (except the .Net framework 3.5 and Explore 8 due to I allready have installed the Net frame 4.5.1 and Explore 11.
I dont need the GPS exporter so I skipped that to)
After launching the GS and passing the opening screen I try to press the connect button in the top ribbon. Next to this button it is noted that the COM 3 is in use. I have no idea which one of my many USB ports and have connected my ground end unit to. I seems I dont have a choice. Regardless swithing the connection of the ground end unit to other USB ports the COM 3 remains next to the connect button???
Why is it COM 3 every time? I have tried to installed on two PC and COm 3 is choosed both time!!!
When pressing the connect button, GS tries to make a handshake with the maincontroller, but fails.
GS suggest the following 4 point solutions:
1. Check the data link power! How do I do this? The ground end has a solid green (link) and a blinking red (tx/rx). The air end has a solid green (link) and a blinking green (tx/rx))
2. Make sure you have installes data link driver fro DC! I did installe all that, incl assistance software and drives from DJI.com
3. Check the serial port selection is correct! How do I do this?
4. Make sure that the two data link teminal placed not too close! Is that the ground end and air end? Then I have over 6 meters between thoose two units.
It seems that my problem is that GS cant communicate with the ground end.
I have connected both USB connectors from the GS to USB ports on the PC.
I have tried to switch thoose two USB connectors to other ports.
I have installed the assistance software for datalink, but can not connect to that either.
I have installed the USB drivers from the installation CD.
I have installed the DataLink driver (from dji.com for 2.4 GHZ)
I really need som help here, orthervise I have to return the product to the dealer.
Have any of You Guys tried something simular? I have did you solve the issue?
Hope You can help me.
Regards
Morten Gabel (denmark)
I just bought the DJI groundstation to use it with a PC
I have installed the drivers and programs from the companion installation CD (except the .Net framework 3.5 and Explore 8 due to I allready have installed the Net frame 4.5.1 and Explore 11.
I dont need the GPS exporter so I skipped that to)
After launching the GS and passing the opening screen I try to press the connect button in the top ribbon. Next to this button it is noted that the COM 3 is in use. I have no idea which one of my many USB ports and have connected my ground end unit to. I seems I dont have a choice. Regardless swithing the connection of the ground end unit to other USB ports the COM 3 remains next to the connect button???
Why is it COM 3 every time? I have tried to installed on two PC and COm 3 is choosed both time!!!
When pressing the connect button, GS tries to make a handshake with the maincontroller, but fails.
GS suggest the following 4 point solutions:
1. Check the data link power! How do I do this? The ground end has a solid green (link) and a blinking red (tx/rx). The air end has a solid green (link) and a blinking green (tx/rx))
2. Make sure you have installes data link driver fro DC! I did installe all that, incl assistance software and drives from DJI.com
3. Check the serial port selection is correct! How do I do this?
4. Make sure that the two data link teminal placed not too close! Is that the ground end and air end? Then I have over 6 meters between thoose two units.
It seems that my problem is that GS cant communicate with the ground end.
I have connected both USB connectors from the GS to USB ports on the PC.
I have tried to switch thoose two USB connectors to other ports.
I have installed the assistance software for datalink, but can not connect to that either.
I have installed the USB drivers from the installation CD.
I have installed the DataLink driver (from dji.com for 2.4 GHZ)
I really need som help here, orthervise I have to return the product to the dealer.
Have any of You Guys tried something simular? I have did you solve the issue?
Hope You can help me.
Regards
Morten Gabel (denmark)