I recently updated my p3S controller now I'm getting an outdated firmware for my drone and it will not activate the rotors. what can I do other than update the probe firmware I can't get it to take.
Firmware Update
- Thread starter K 2 the B
- Start date
To update the firmware on your p3p remove the micro sd card from the camera and download the firmware update, unzip it and copy the .bin file to the root directory of the sd card. Place it back in the micro sd slot on the camera and power on your aircraft. Do NOT turn on the remote controller. The aircraft will update on its own. You can confirm its updating by watching the led on the front of the camera. Alt flashing red and green means its updating. Just let it run (could take 10 minutes) when the light stays green power off and then power the aircraft back on.
Okay, I haven't flown my P3P for over 6 months now. I'm now trying to bring everything up to date. But I can't seem to find the web page to download the P3P firmware. Can someone provide it for me? Please...
Oso
Premium Pilot
Try here on the download page:
DJI - The World Leader in Camera Drones/Quadcopters for Aerial Photography
As the market leader in easy-to-fly drones and aerial photography systems, DJI quadcopters like the Phantom are the standard in consumer drone technology.
www.dji.com
If you get the message that it’s no longer in production, just close out the message and you should see the download bin.
If you have trouble, try here:
> Important note: Make sure you understand the changes related to AC FW 1.11.20. It was released in July 2017 and introduced forced flight restrictions similar to beginner mode if you haven't "registered" your app with DJI. Click here for more info.
Last edited:
Similar threads
- Locked
