I finally solved the issue with mine! After hours of playing about with it and actually taking the camera and wifi sender apart to have a look at the chips to see if any sort of overheating had occurred it turned out that during one of the firmware updates (unknown whether the controller, the drone or the app update) it had removed the binding between the camera and the wifi sender. Having thrown away my box this obviously posed a problem at retrieving the FC200's MAC address, I sent a email to Dji customer support and in all fairness to them they sent a reply the next day with a qr code after I supplied them with the serial off the FC200. Completed a new binding process which gave me back everything on the app apart from live feed, The FC200 obviously had comms with the wifi sender as it was picking up the memory card and all other telemetry. I then rolled back the app to 1.0.48, completed another binding process and bingo! I have full live feed back with all telemetry! What a bloody ball ache! I believe that the firmware updates or the new Dji go version of the app caused all this! Hope everyone else manages to get there's going! I actually got that pissed off with it I went out and bought a Phantom 3 pro! If you also download inSSIDer onto your pc this will reveal the FC200's hidden MAC addy to! Hope this helps
Sent from my iPad using PhantomPilots mobile app