I'm not familiar with this person . Is he here in the forum ?
Sent from my iPhone using PhantomPilots mobile app
Sent from my iPhone using PhantomPilots mobile app
DIY Phantom 3 Standard
- Thread starter Jack P3S
- Start date
yeah, i put the @ symbol in front of his name to link directly to his profile. I think I may be wrong though I am not sure, I think he may have done the repeater thing with a different brand of gps quadcopter but am not sure I guess you could always PM him.
- Joined
- Apr 14, 2015
- Messages
- 3,534
- Reaction score
- 2,041
- Age
- 48
I've done the same alteration mod with P2 and it will be the same with the P3 standard .you have to use the battery plug from the standard w/ the smart contacts or you won't be able to start the motors. Which also means you'll have to use the smart battery
Thank you . That's the answer I was looking for though I hate to spend another $100 on a battery of course .
What frame did you use on your build ?
I'm thinking of using PVC to build a cheap X frame but if there's something out there at a reasonable price that I can add my own gimbal to ect ..
I'd be interested in input .
Thanks
Sent from my iPhone using PhantomPilots mobile app
- Joined
- Apr 14, 2015
- Messages
- 3,534
- Reaction score
- 2,041
- Age
- 48
See my profile pic! Thats a p2 guts on a tarrot 650 frame. The arm length difference didn't seem to matter much it still flies just a steady as the P2 it came from. I just had to take the power cable since I didn't have the battery box anymore and tape it onto the battery and then bungee the battery up underneath the frame
The PS3 board is a lot bigger with the ESCs part of the mainboard . I assume I'll have to extend the motor wires a little to put it on the 650 frame ?
I still have the battery box from the p3 lol could mount that on there .
Sent from my iPhone using PhantomPilots mobile app
