Connect cables from landing gear. Phantom 4 pro.

[kim1988]

Hi. Where do i connect the 2 grey cable from landing gear and 1 black cable and 1 white cable? On the mainboard there is number 1,2,3 and 4

 

[kim1988]

Here

 

[Starz]

Based on your picture, you have some work to do. Two of your connectors are junk.

 

[kim1988]

Based on your picture, you have some work to do. Two of your connectors are junk.

I know. But where to put the 2 grey and the black one and white one? Looks like one of them should not be connected

 

[kim1988]

I know. But where to put the 2 grey and the black one and white one? Looks like one of them should not be connected

The white one is to short

 

[Starz]

I thought I had a picture of those connections, but can’t find it and I’m not at home at this time. Check with @Droneted

 

[Capt KO]

I always take pictures before disassembly but sadly already deleted those. I should know by memory but but...what was the question?

 

[Starz]

The white one is to short

Probably because it isn’t correctly routed in the shell. I have seen this before myself.

 

[Aairon]

I wonder how youre going to plug anything onto those two damaged connectors, they were ripped off the PC board and will need to be replaced using SMD soldering techniques. The board the connectors went to is damaged!
Of course the two connectors that were torn off are the two you need to reconnect to.

 

[kim1988]

I wonder how youre going to plug anything onto those two damaged connectors, they were ripped off the PC board and will need to be replaced using SMD soldering techniques. The board the connectors went to is damaged!
Of course the two connectors that were torn off are the two you need to reconnect to.

I have bought a new board and just need to know where to plug the cables.

 

[Starz]

If you look closely at your cables, the two grey cables are slightly different colors.
One is slightly darker than the other.

 

[kim1988]

If you look closely at your cables, the two grey cables are slightly different colors.
One is slightly darker than the other.

So that means i can put them where i want?

 

[Starz]

I’ve never tried switching them to different positions, so I can’t say what that would do. You’re dealing with antenna boards and compass boards and my guess is the other components will know if you don’t connect them correctly. Any luck through @Droneted ?

 

[Droneted]

they have to be in order
white
dark gray
light gray
Black

 

[Droneted]

I wonder how youre going to plug anything onto those two damaged connectors, they were ripped off the PC board and will need to be replaced using SMD soldering techniques. The board the connectors went to is damaged!
Of course the two connectors that were torn off are the two you need to reconnect to.

I agree!