Had same problem. Thanks to foram members it's sorted. When doing horizontal and vertical 360 try and go a bit further. I did a 360 plus about another 90 till got green lights. Hope this works
Same here. and my serial # is 1313 How bad is that. Not getting much help from DJI.Hello,
I recently got the Phantom 3 in the mail.
Unfortunately I am unable to get the compass to calibrate at all.
I have the latest firmware, tried calibrating the compass out in an open field as well as indoors.
It keeps saying Compass Abnormal / Compass Error and when I try to calibrate on the facing the camera down part I get magnetic interference error. The horizontal facing calibration gives a green light.
Anyone have a clue what can be causing this?
I tried IMU calibration as well, but it would not help.
When I look at the sensors screen I see a big time interference in the compass line. Mod of a number bouncing around 350 rapidly.
Any help is appreciated before I try shipping it back to DJI.
Greetings
VHC
mine reads in the 300's on both.Hi, thanks for your reply.
I tried calibrating it in a wide open meadow but it still wouldn't let me calibrate, would a simple belt interfere with it while i try to calibrate it above my head by holding it up? Also, if someone could tell me what their compass sensor reads in the DJI Pilot App on a properly functioning compass I can see if there is a big difference or something maybe?
I read the other post about someone needing many attempts to calibrate, I am going at about 20 attempts right now
Will this work on a P3-4k?Try degaussing the compass and do the compass calibration again. This is a video on the P1 but the principal is the same.