Are batteries backward compatible?

[Supercell]

Hi, I'm new to the forum and to drone flying.
I hope someone can help. Sorry if this is posted in the wrong part of the forum.

I have a Phantom 1 with dead batteries and would love to get it flying.

I have thought about market batteries: Aliexpress. But they are PH2 Batteries.

https://www.aliexpress.com/item/1005005534557825.html?spm=a2g0o.cart.0.0.1d2d38damleXQX&mp=1&pdp_npi=5%40dis%21NZD%21NZD%2089.39%21NZD%2066.15%21%21NZD%2066.15%21%21%21%402103010b17475202754433715e3cbc%2112000033444144473%21ct%21NZ%21135014645%21%211%210

Does anyone have any experience with these batteries and know if they are backward compatible?
I would also welcome any recommendations on whether this is a good idea or not, before i buy them.

I am based in New Zealand. Any assistance would be gratefully recieved.

Thank you in advance
Rick

 

[Mark The Droner]

You cannot use P2 batteries in an original Phantom.

Good luck

 

[Daniel NZDF]

Hello, I am in New Zealand too. you can buy DJI phantom 1 batteries off Mighty ape.
Phantom 1 Battery

 

[RodPad]

@Daniel Mclean
Welcome to the forum!

Your doing a lot of likes
Just looked at all your posts, and likes.

All those member names are great.!

@captainmilehigh?,
I would take those likes back.

Good to see a young newbie!
Whats your background, etc.
Add some info in your signature.

Rod ..

 

[captainmilehigh]

@Daniel Mclean
Welcome to the forum!

Your doing a lot of likes
Just looked at all your posts, and likes.

All those member names are great.!

@captainmilehigh?,
I would take those likes back.

Good to see a young newbie!
Whats your background, etc.
Add some info in your signature.

Rod ..

Ok @RodPad , don't rattle my cage so early in the morning. Haven't had my coffee yet..........️

 

[Daniel NZDF]

Hi, I'm new to the forum and to drone flying.
I hope someone can help. Sorry if this is posted in the wrong part of the forum.

I have a Phantom 1 with dead batteries and would love to get it flying.

I have thought about market batteries: Aliexpress. But they are PH2 Batteries.

https://www.aliexpress.com/item/1005005534557825.html?spm=a2g0o.cart.0.0.1d2d38damleXQX&mp=1&pdp_npi=5%40dis%21NZD%21NZD%2089.39%21NZD%2066.15%21%21NZD%2066.15%21%21%21%402103010b17475202754433715e3cbc%2112000033444144473%21ct%21NZ%21135014645%21%211%210

Does anyone have any experience with these batteries and know if they are backward compatible?
I would also welcome any recommendations on whether this is a good idea or not, before i buy them.

I am based in New Zealand. Any assistance would be gratefully recieved.

Thank you in advance
Rick

Hey! Where have you gone? Have you had any luck getting batteries to work?

 

[crash1sttime]

Any battery that you use in a FPV quad is useable such as this

2S Lipo Battery XT60 7.6V 50C HV 1100mAh 2S1P for FPV racing UAV RC quadcopter | eBay UK

Application: Widely used in rc car airplane helicopter part(Only if the voltage, dimension and the plug match, then it will fit) Material: Lithium polymer; Battery voltage: 7.6V; Cell: 2S; Capacity: 1100mAh Continuous discharge rate: 50C ; Discharge plug:Deans XT60 Plug Connector Dimension...

www.ebay.co.uk

 

[crash1sttime]

This is what an original battery for the P1 looks like but they are rare now

https://www.lbwfree.club/?path=page/ggitem&ggpid=2924569