Advanced camera in a Pro V2.0

[rtcook]

Can a Phantom 4 Advanced camera/gimbal be used in a Pro V2.0? Thinking of upgrading drone but using the camera I have. I thought I read they were the same. Can someone with more experience comment on this?

Thanks,

Roger

 

[Starz]

Basically the same. I believe someone mentioned once that the V2 has a different chip on one of the boards but ………..

 

[Capt KO]

Why? Unless you found a V2 without or broken camera.

 

[rtcook]

Might have an opportunity to buy a V2 without controller, batteries, camera, etc. I could then use the camera off my Advanced if it would work.

 

[Capt KO]

Don't know what else needed to add the camera but your remote won't work with V2. Remote not cheap.

 

[rtcook]

Got that covered. Want to use my goggles wireless too.

 

[rtcook]

So, can anyone say for sure the Advanced camera will work in the Pro V 2.0?

Thanks,

Roger

 

[Capt KO]

So, can anyone say for sure the Advanced camera will work in the Pro V 2.0?

Thanks,

Roger

PM Droneted on this forum. He works on them, a drone guru.

 

[rtcook]

Thanks!

 

[Starz]

It will work. May I ask what the going rate is for the V2 only is.
Also, are you sure it’s a V2? I have seen several sellers that claim they have a V2 and just don’t know the difference.

 

[rtcook]

Droneted on the forum has a couple for $350. Some on eBay as well. $379 or BO.

 

[Starz]

The one on eBay(if you look close) is a bit rough.
Thanks and good luck.

 

[rtcook]

Yep. Dealing with Droneted now. He came recommended to me.

 

[JonEQuest]

I have a crashed P4P V1. Can I use parts from a P4 (non pro) to at least fix mine and get flying again? My camera was lost in the crash and I am not sure what else to do since the camera costs way too much to fix the drone. I am also wondering if the P4P and regular P4 batteries are the same. I have a line on a (cracked case easy fix) regular P4 for cheap.

 

[Starz]

Parts from a P4P are not interchangeable to a P4.
(maybe some of the screws)