motor

  1. D

    Motor test results after tipover. Are these figures normal?

    A sudden gust of wind tipped over my Phantom 3 Professional while it was stationery on the ground. It carried the Phantom a couple of metres before it came to a stop. The propellers were in bad shape and afterward I hear a clicking / hissing sound from the motors during startup and shutdown. I...
  2. E

    Locked props & not shutting down right away

    Questions about stopping prop rotation. When practicing and flying slowly & low, I fell and the props were caught and locked from rotating, I pulled the left stick all the way down to stop the motors right away. I understand that it should take about 3 secs to shut down. Today, however, one...
  3. A

    Problems regarding Phantom 3 Standard motor compatibility.

    I have owned this product for about 3 months now (Phantom 3 Standard), and now one of the motors on it is failing. I know the reasoning for this. It's because I used to have the prop guards on it for safety, but when I removed them, I screwed in the long screws on the motors. Only one motor...
  4. L

    Interchanging 2312 and 2312a motors on phantom 3?

    I need to replace the 1 motor on my phantom 3, which uses the newer 2312a motors from DJI (Buy 2312A Motor (CCW) | DJI Store), but I have lots of spare motors that use the old 2312 motors from DJI (Buy 2312 Motor (CCW) | DJI Store). On the DJI website they say they aren't interchangeable, but...
  5. G

    P2V+ Main Brd PSU Fault?

    Hi All, P2V+ refers - It appears the Main Brd PSU is dead. I would like to identify the PSU Regulator Comp. On attached pics I have marked what I think it is. Chip marked with MP24820N I can't find a datasheet on this chip, if correct. Is there a teardown to indicate the functional blocks on...
  6. M

    gimbal motor isnt fully correcting

    I just noticed today while flying that my gimbal motor isnt fully correcting i am not sure if i nicked it or if this is a firmware problem or what but help would be appreciated thanks maybach123
  7. C

    ESC error

    I've been getting an ESC error from the DJI Go app while trying to start my motors. I've fixed an ESC error before by replacing a motor because I knew I damaged a motor before hand. This new ESC error is from a 50 foot crash into 2 inches of snow as a result of probable battery failure. The...
  8. abobroff8

    Descending the P3 Standard from high up.

    I was flying my P3 a couple days ago and flew it up 334 feet. I started to descend and I took almost 2 minutes to get back, close to the ground. I was trying to lower it pretty quickly but I was scared if I lowered it to quickly it would start to go out of control or I would accidentally disarm...
  9. P

    Phantom 3 Motor (or prop) not balanced.

    Hey I'm one of those people with the horror story of crashing their Phantom 3 the day after they got it. Well the body was bent a little and one of the CCW motors locked up. I replaced the bad motor and the plastic is back in place. But when I was taking it for a test run I noticed this. When...
  10. J

    Phantom 3 Adv ESCs & Motors

    Ok, so had prop guards on and flying like normal, but then did a firmware update.... silly me to remove all the the props/accessories for the update and use the long guard screws again... Now... I am getting an esc error and all 4 motors are not working. My question is: Did the guard screws...
  11. Eric1084

    New Phantom. Got a returned unit, and have old motors. Help.

    I just received my Phantom 3 Professional that I ordered from Adorama on Black Friday. Upon opening the box, everything seems fine. Except... The outer box is dirty(Probably from storage). So I thought 'Okay. That doesn't mean anything'. And I opens the box. Start charging the controller. After...
  12. atl_quad

    Phantom 3 - Motor Failure

    While landing my P3Pro on Wednesday evening during a sunset flight, I noticed an unusual sound. Upon closer inspection, I discovered that one of the motors was on the verge of complete failure. It appears that it started to unwind itself. The motor was in normal condition when I performed my...
  13. M

    Crash and problem with the roll motor gimbal

    I had an accident recently with my phantom 3 and luckily still fly , but the camera gimbal not stabilized horizontally. (in the video you can see how it behaves ) . I disarmed the yaw motor and in that moment fell like dust parts of the magnet, that was the reason why when one moved his with the...
  14. J

    texture of new motors

    guys, just got the P3P (upgraded version)... I'm a bit OCD and but I noticed that 3 motors of out 4 have a rather smooth/shiny texture.... and 1 has a slightly 'powdercoated' texture... anyone notice the same on their motors? (photo attached has the black motor with the powercoated texture)...
  15. J

    Replacement motor for Cyclops gimbal?

    My ArialFreaks Cyclops gimbal needs a new brushless motor (pin sheared off one of the motors after a crash). What is the model number of these motors? Or...can they be replace with another brushless motor? Thanks, :)
  16. DevinC

    Phantom VIsion 2 + wont turn on ( troublshoot help / guied )

    Hello so to any one that has had the problem with there phantom where you put a batter in it click the power once push it again to hold it you get a quick flash and a beep and its a dead .... I HAVE SOMTHING THAT "MAY" HELP YOU ok first off this might not work for every one or every...
  17. Freddie mckenzie

    Phantom 3 Pro/ADV motors

    Anyone know what type of motors are used in the Phantom 3 pro/adv whether they are like dji e310's or if they are different to those in the Phantom 2 Vision+ v3. They are different to those in the standard as can be observed by the appearance. Anyone know what motors are used in the standard...
  18. Damon Yanes

    Help Crashed and need a Yaw Gimbal Motor

    Hello I crashed my drone which practically killed me. Ive been saving up to buy this drone since before they were released. I severed the flex cable and the actual camera broke free from the yaw gimbal motor. so I put in a new cable but where I messed up is . when i reattatched the camera to...
  19. D

    Do my motors sound ok?

    So after having a crash and the Phantom landing in it's props onto pavement, I'm curious if my motors sound ok? I've never tested the motors with props off, but there seems to be a loud winding sound that I dont recall hearing before with props on. They feel okay when turning them by hand, none...