Recent content by Malakai

  1. Malakai

    Blur/Focus problem in images? How to easily fix it on the P3 Advanced

    Why ask for my advice and not listen. I have explained that you appear to have a very very slightly blurry image on the left side and how to correct this.
  2. Malakai

    Blur/Focus problem in images? How to easily fix it on the P3 Advanced

    Ok, so i took your raw file, added a bit of sharpening to bring out the detail. This shows me that the left side of your image is very slightly blurry, the right side is perfect. You need to quarter turn all four screws to loosen the board and nudge it very very slightly to the right. Quarter...
  3. Malakai

    Blur/Focus problem in images? How to easily fix it on the P3 Advanced

    Ok, after looking at a raw file and adjusting for sharpness (image below), its very slightly out of focus on the left side of the image. You will need to adjust just the right side of the sensor and only by a very very tiny amount, the board needs nudging a super tiny bit over to the right.
  4. Malakai

    Blur/Focus problem in images? How to easily fix it on the P3 Advanced

    Ok could you post a link to one of the raw files from this set so I can examine it better. Dropbox/google drive etc.
  5. Malakai

    Blur/Focus problem in images? How to easily fix it on the P3 Advanced

    Have you applied sharpening to these images when you edited them?
  6. Malakai

    Blur/Focus problem in images? How to easily fix it on the P3 Advanced

    Ok, answer me these questions. 1. Are these images from the drone RAW or JPG? 2. Have you edited these photos in any way?
  7. Malakai

    Blur/Focus problem in images? How to easily fix it on the P3 Advanced

    Its up to you. If these are DNG RAW files and no adjustments have been made to the image then I would post process and add sharpness. If these are the JPG straight from the drone then i would say there is definitely a focus issue.
  8. Malakai

    Blur/Focus problem in images? How to easily fix it on the P3 Advanced

    You could try adjusting the screws. It might pull the focus back in. Yes do all four exactly the same. Try it all at your own risk though :)
  9. Malakai

    Blur/Focus problem in images? How to easily fix it on the P3 Advanced

    They look a little blurry all over. you could try ether very slightly loosening the screws off, not even a quarter of a turn or very slightly tightening them up. This looks like it might be more of a focusing issue where you might need to adjust the actual lens.
  10. Malakai

    Blur/Focus problem in images? How to easily fix it on the P3 Advanced

    This fix is more for focus issues around the edges of the image. Primarily because the focal plane is already set at the right distance, its just the focal point is off center. For center focus issues you could try adjusting all four screws in or out using the exact same amount on all four...
  11. Malakai

    DJI Spark tear down

    Lol boom! Great stuff Ray!
  12. Malakai

    Preflight checklist

    I just use Microsoft Onenote, create a new page and fill it with my checklist, copy and paste this page a few times then all I do is auto fill the date/time and tick the boxes. It automatically clears them as I do them. Best of all it's free and I can access it anywhere.
  13. Malakai

    P3 Firmware Loose Props or Missing

    Really lol, which part don't I know what I'm talking about? Explain or go troll somewhere else. Sent from my iPhone using PhantomPilots
  14. Malakai

    P3 Firmware Loose Props or Missing

    lol, my gut tells me in a while there will be a "my phantom tipped over on the ground" post will be coming soon :)