chluk2425 said:may I ask what's your procedure or activating the booster? I was working in this order:-
Turn on the reaper
Turn on phone's wifi and connect the reaper
Open booster apps
Slide the button to on
Set the values to 13dbm for both reaper and the drone
Open up vision app and fly
The results was, I get 6 out of 8 phantom connection broken at around 400m distance... not that impressive but I would say i get more distance than without it. The location where I was flying were either with cranes or with lots of buildings having quite a lot interference from their wifi.
Question: was this a right order, and any comments on improving the range?
Thanks in Adavnce
In the original RC Taco instructions he said to connect with the DJI Vision app first... Open camera tab and verify video signal... then open Utility app and perform your boost adjustments...
You say you set 13dBm on both... that would actually reduce the power of the repeater as it comes out of the box at 20dBm setting from DJI per their spec sheet ... next thing I would try is boost to 20dBm on the camera setting and leave the repeater alone and see if that increases your results...
Last time we checked the repeater settings weren't working anyway so... you set it at 13dBm.... and it had no effect so no big deal... I don't know if ocatcr has resolved that issue recently but I haven't heard anything so I assume it still doesn't function.