Start Up Question

[hrosee]

Just linked up a new Version 2 transmitter to my Version 1 phantom. Everything seems to work great with one quirk.

With the old transmitter the H3-3D set to the position I had left the lever on the rear of the transmitter as expected,

With the new transmitter it always starts with the camera pointing at the ground. The wheel works perfect. I was just wondering if this was normal. I would prefer to have it pointing straight ahead but can live with this if it's normal.

Thanks.

 

[battman2036]

following. I just did the same.

 

[hrosee]

Didi a lot of search and from what I read everywhere this is just how it is.

 

[battman2036]

Didi a lot of search and from what I read everywhere this is just how it is.

well, then I guess that answers that.

 

[Marlin009]

Mine is a V2 and came with that controller and it stops at about 45*.

Since it didn't come up, you did calibrate the wheel, right?

 

[hrosee]

yes, did the calibration. On the rcgroups there are post all over the place about it pointing down or 45 degrees like yours. A DJI guy was on there and said they were looking at it but then came the Phantom 3 and they quit responding. I guess all updates for the 2's are done with the exception of any new no-fly zones. It's not a big deal.

 

[battman2036]

Did the calibration as well and forgot to click the upgrade option. Was little surprised when the app took over and it stopped responding. Good thing I marked the threads. [emoji12]


Sent from my iPhone using Tapatalk