[SOLD ]P3P for parts or repair

[Waynosan]

Hey all,
I have a Phantom 3 Pro + some accessories for sale for parts. I planned on putting these up on Fleabay but figure I'd give fellow PhantomPilots a shot first. The aircraft in question was involved in an incident as described here: RTH initiated while P3P was on the ground resulting in crash

Here's what I have:

1. Phantom 3 Pro with broken off gimbal, missing one frosted LED cover, and a frame that's popped open but otherwise looks fully functional(see photos)
2. DJI case
3. Triple battery parallel charger (requires original charger)
4. 3D printed holder height extender for tablets(yellow)
5. 3D printed landing gear support
6. New sets of props in black bag (2 sets of 4)
7. 1 set of used props
8. Prop balancer (aluminum piece)
9. Remote control
10. HDMI output unit (sold)
11. Spare set of grommets and prop removal tool?
12. Car charger
13. Camera with broken front glass
14. Original charger
15. Two DJI batteries, one with 30 charges and the other with 31 charges
16. 3D printed camera protector/gimbal restraint

The drone powers up I think I even hovered it after the accident so I think it's repairable but I just don't have the time to mess it.

If you're interested in any particular part or all of it drop me a PM with an offer. If I don't get sufficient takers I'll throw it up on the fleabay.

Thanks for looking!

 

[KachemakDiver]

I’ve let a good friend of mine know about this. I should have what his offer will be today.

 

[Monctonrc]

Can you tell me a ball park guess as to what you hope to sell for

 

[Waynosan]

Hi guys,

I also forgot to mention that there is a 3D printed lens-cover/gimbal restraint that I'm not sure is shown in the photos. WRT the ballpark $, that is a valid question but I haven't had a chance to look into what this stuff is selling for these days; I plan to do that later tonight after I finish working on my taxes.

Today I took it out to the backyard and FWIW the P3P does fly. After warm up and GPS lock I launched it and did some light maneuvers (see screenshot attached). For full transparency I did notice that the individual cell voltages aren't being displayed in the app (pack voltage is displayed) but a quick search showed that this is likely due to the detached gimbal as described here: Battery cell voltages missing?

 

[Waynosan]

Posted it on ebay here.

 

[Xrayracer]

Hey all,
I have a Phantom 3 Pro + some accessories for sale for parts. I planned on putting these up on Fleabay but figure I'd give fellow PhantomPilots a shot first. The aircraft in question was involved in an incident as described here: RTH initiated while P3P was on the ground resulting in crash

Here's what I have:

1. Phantom 3 Pro with broken off gimbal, missing one frosted LED cover, and a frame that's popped open but otherwise looks fully functional(see photos)
2. DJI case
3. Triple battery parallel charger (requires original charger)
4. 3D printed holder height extender for tablets(yellow)
5. 3D printed landing gear support
6. New sets of props in black bag (2 sets of 4)
7. 1 set of used props
8. Prop balancer (aluminum piece)
9. Remote control
10. HDMI output unit (sold)
11. Spare set of grommets and prop removal tool?
12. Car charger
13. Camera with broken front glass
14. Original charger
15. Two DJI batteries, one with 30 charges and the other with 31 charges
16. 3D printed camera protector/gimbal restraint

The drone powers up I think I even hovered it after the accident so I think it's repairable but I just don't have the time to mess it.

If you're interested in any particular part or all of it drop me a PM with an offer. If I don't get sufficient takers I'll throw it up on the fleabay.

Thanks for looking!

i pass this on to buddy