sd card error

[ElevationOneDrone]

Hey guys...

I have multiple SD cards, all are giving me an SD Card Error "please replace".

Any idea whats going on?

I have updated all firmware, and no solutions yet.

 

[ArnoldLeVine]

What happens if you take the card out and insert it to a PC or Mac?

 

[ElevationOneDrone]

What happens if you take the card out and insert it to a PC or Mac?

works like a normal card. All of them.

 

[mdasbach]

Not sure if this is the problem, but I have some 32Gb cards that will only work when formatted as FAT32 / 32Kb. My 64Gb cards work when formatted as exFAT / 128 Kb. Also, did you try formatting them in the AC? Hope this helps.

 

[Capt KO]

Are the cards U3? Many cards are not up to task. Need words like Extreme, Ultra, Super, etc. Other are too slow for high speed cameras. I have several old ones that just don’t cut it. Need (3) on card. ?

Might try blowing out card slot to remove debris if using correct card. Good luck.

 

[ElevationOneDrone]

Are the cards U3? Many cards are not up to task. Need words like Extreme, Ultra, Super, etc. Other are too slow for high speed cameras. I have several old ones that just don’t cut it. Need (3) on card. ?

Might try blowing out card slot to remove debris if using correct card. Good luck.

I have been using the same U3 cards for over a year. Just had a gig earlier yesterday, worked fine.

I just sent it off to DJI for a refresh. Not playing with this nonsense. ??

 

[Capt KO]

Yay. Wasn’t paying attention to who I was talkin to. ?

 

[ElevationOneDrone]

Yay. Wasn’t paying attention to who I was talkin to. ?

Not sure what that means ?‍

I came on to ask because I did all the required updates and have all the right equipment.

Just randomly stopped working.... I just assume it’s a bad SD reader.

I only used approved cards.

 

[Capt KO]

Not sure what that means ?‍

I came on to ask because I did all the required updates and have all the right equipment.

Just randomly stopped working.... I just assume it’s a bad SD reader.

I only used approved cards.

Thinking you were a novice. Hope all good now.

 

[TontoFAC]

If you have not, format the sd card while installed in the drone.