phantom 4 pro plus obsidian controller

[ultimatetetoyman]

Is the phantom 4 pro plus obsidian controller totally compatible with the regular phantom 4 pro , I can bind it and fly with it but the range is low and the controller says poor radio signal

 

[Capt KO]

Only difference is the color. P4P v1 remotes can also be used on the other P4 models, changeable under advanced settings. Also the frequency can be changed between 5.8 and 2.4 which could cause your problems. Try switching to see if that corrects it, P4P usually uses 5.8 but in certain areas 2.4 might work better. Device must be connected to remote to make these changes but drone connection is not necessary.

 

[Capt KO]

If those don't work, must be antenna problem on remote or drone. Assuming yours on remote are open and aimed correctly at the aircraft. If so, linking a different remote would solve the problem of whether remote or drone being cause.

 

[Andy9]

Does the pro plus and pro have the same remote?

 

[Capt KO]

Does the pro plus and pro have the same remote?

Plus remote 300E has the screen. Pro 300F without. Both can be used with all P4 v1…but must be set to correct frequency to link. P4P @5.8 others @2.4

 

[1buddyc]

I fly an old P4 Standard with a 300E Controller, works just fine.
I also have a spare Obsidian 300E Controller that I'd be willing to part with if anyone is interested.