- Joined
- Jul 4, 2015
- Messages
- 5
- Reaction score
- 0
- Age
- 94
There have been numerous reports of Motor Arm Cracks. In my case I discovered cracks as shown in the attached files after 3 short flights.
That is bad, need to file claim and send it back.There have been numerous reports of Motor Arm Cracks. In my case I discovered cracks as shown in the attached files after 3 short flights.
Peter at acesdeals.com replace the unit.That is bad, need to file claim and send it back.
Is that an Allen wrench on the DJI Lft ft JPEG in the right lower corner? Were they loose?There have been numerous reports of Motor Arm Cracks. In my case I discovered cracks as shown in the attached files after 3 short flights.
Yes; There is an Allen wrench there. The reason I turned it upside down was I was going to install Prop Guards. After I saw the cracks, I stopped and took these pictures. I did not touch the screws.Is that an Allen wrench on the DJI Lft ft JPEG in the right lower corner? Were they loose?
I did buy it from a dealer and when I took it out of the box and installed the firmware, I did not see any evidence that it was not new. All of the Plastic bags were still sealed.There's something fishy here. That's not the way it came from the factory as the screw is coated with a blue substance on one side of the screw. It's not applied any other way. Did you buy it from a dealer? Did anything look used when you got it? I've seen many pictures of problems stemming from the factory and this isn't it
So you are getting a replacement?Peter at acesdeals.com replace the unit.