Hello, newbie would like to get some advice.
I crashed my bird few days ago. It was because these folding carbon props - avoid them. One motor was ripped out, broken props etc. I changed the housing, top and bottom, connected everything as it was before. I've repaired the damaged motor, the wiring / red, black, yellow /was coiled together so I've fixed it.
So far good. Attempt to start but the app shows ESC error.
I've measured the current, it flows 15.2V to each motor, but they doesn't spin up. According to the flylog the ESC are ok, but it shows some hardware error. I can upload the log later.
1.Could it be that because one damaged motor the other three won't spin up?
2.Because of the first issue, hardware error means fried motherboard?
Thanks
I crashed my bird few days ago. It was because these folding carbon props - avoid them. One motor was ripped out, broken props etc. I changed the housing, top and bottom, connected everything as it was before. I've repaired the damaged motor, the wiring / red, black, yellow /was coiled together so I've fixed it.
So far good. Attempt to start but the app shows ESC error.
I've measured the current, it flows 15.2V to each motor, but they doesn't spin up. According to the flylog the ESC are ok, but it shows some hardware error. I can upload the log later.
1.Could it be that because one damaged motor the other three won't spin up?
2.Because of the first issue, hardware error means fried motherboard?
Thanks