P3p part out or buy for parts or to fix

Joined
Jan 7, 2016
Messages
285
Reaction score
59
Age
37
Location
Louisiana
image.jpeg image.jpeg Like the title says , have a crashed p3p with 4K gimbal and camera and professional RC , brand new never opened charger(100w ) .

The professional was crashed about two months ago. Sent off to Dji and was surprised that it can be fixed , just for heft fee . $752 fee to fix my professional . So I refused to have it repaired and waited extra I think , to have it sent back to me in the condition in which they got it .
( bought a new p3p from the $799 eBay deal to replace my phantom while I decide to sell as is or to part out or maybe eventually fix it myself .)
I have since removed the compass cable , a cable for the gimbal , and a couple nick Nacks here and there like landing gear , and the rubber feets 。 an assorted pack of every cable/ harness u need for the phantom 3 can be found online for about 15$. New shell is $60 that's with new landing gear . New compass is about 15$ u would need too . Roll arm and camera ribbon cable will also be needed since the roll /yaw arm was snapped when it crashed. Would like to sell the whole thing really. If not I'll Fix it whenever I get the free time . This does come with the 100w charger and adapter wall plug (new never opened- from when j bought the second p3p . And also comes with a used phantom 3 professional gl300b RC . I can include a battery if you need also .

Phantom 3 pro version w323a. RC gl300b.

Still has vision positioning system attached and the professional light ridge with antennas still in place


Like I said , can be sold as one package or if u need a specific piece in sure we can work out something . Everything must go !! Located in Louisiana. .

Comes with original oem box and paperwork.

Can be a working /flying bird again with the right parts and expertise . I just re shelled my second p3p and replaced tidbits here and there , although a length process , I must say - opening up the phantom is pretty fun and interesting - just make sure u have about 3-4 hours to burn.

Dji sent me and invoice for parts needs to have the phantom flying again . I'm sure some parts are not necessary whole others are imperative . Lol small history in the crash . Bird was csc st 160 ft up and fell upside down onto someone's front lawn . We are not going to get into politics about csc but it happened . The bird inverted upside down and fell like a rock and landed on its props onto grass from 160 ft up . The camera didn't actually take a physical impact yet separated from the phantom upon impact at the weakest spot (roll/yaw arm and also the ribbon cable .) No other obvious damage to 4K camera/gimbal and Dji only wanted 69$ for a new roll arm and 54$ for new ribbon cable was all that was quoted to repair the 4K gimbal camera and have it working again .

This would be the perfect buy for someone tech and mechanically savvy to rebuild /replace /repair or just to have as a handy parts bin
 

Attachments

  • image.jpeg
    image.jpeg
    1.4 MB · Views: 461
  • image.jpeg
    image.jpeg
    1.9 MB · Views: 450
  • image.jpeg
    image.jpeg
    2.3 MB · Views: 467
  • image.jpeg
    image.jpeg
    2.5 MB · Views: 419
  • image.jpeg
    image.jpeg
    2.7 MB · Views: 470
  • image.jpeg
    image.jpeg
    1.3 MB · Views: 464
  • image.jpeg
    image.jpeg
    1.3 MB · Views: 436
  • image.jpeg
    image.jpeg
    1.8 MB · Views: 441
Last edited:
Is it still avail LamboH?
Please let me know, I build p2s, and have been wanting to tinker with a 3.
You looking for cash, trade?
Shoot me a pm or email me ( [email protected] ) thanks!

J Dot
 
Whats your asking price.


Sent from my iPhone using PhantomPilots mobile app
 
Is the roll motor still good ?


Sent from my iPhone using PhantomPilots mobile app
 
image.jpeg image.jpeg image.jpeg
Is the roll motor still good ?


Sent from my iPhone using PhantomPilots mobile app

Was invoiced roll arm ($69) and ribbon cable ($50) as far as gimbal / camera repairs /replacement . Nothing else on the invoice mentions anything else needed for the repair so I take it roll arm and ribbon cable is all is needed to fix the 4K camera . . The bird was csc mid air. So it fell upside down n landed on the props. The camera gimbal had no actual physical impact from crash . Visibility all I can see and assess is the roll arm and ribbon cable is sheared off in the same spot


I'll take 260 plus shipping
 

Attachments

  • image.jpeg
    image.jpeg
    1.2 MB · Views: 384
View attachment 49959 View attachment 49960 View attachment 49961

Was invoiced roll arm ($69) and ribbon cable ($50) as far as gimbal / camera repairs /replacement . Nothing else on the invoice mentions anything else needed for the repair so I take it roll arm and ribbon cable is all is needed to fix the 4K camera . . The bird was csc mid air. So it fell upside down n landed on the props. The camera gimbal had no actual physical impact from crash . Visibility all I can see and assess is the roll arm and ribbon cable is sheared off in the same spot


I'll take 260 plus shipping
How much for the radio/charger?
 
View attachment 49923 View attachment 49924 Like the title says , have a crashed p3p with 4K gimbal and camera and professional RC , brand new never opened charger(100w ) .

The professional was crashed about two months ago. Sent off to Dji and was surprised that it can be fixed , just for heft fee . $752 fee to fix my professional . So I refused to have it repaired and waited extra I think , to have it sent back to me in the condition in which they got it .
( bought a new p3p from the $799 eBay deal to replace my phantom while I decide to sell as is or to part out or maybe eventually fix it myself .)
I have since removed the compass cable , a cable for the gimbal , and a couple nick Nacks here and there like landing gear , and the rubber feets 。 an assorted pack of every cable/ harness u need for the phantom 3 can be found online for about 15$. New shell is $60 that's with new landing gear . New compass is about 15$ u would need too . Roll arm and camera ribbon cable will also be needed since the roll /yaw arm was snapped when it crashed. Would like to sell the whole thing really. If not I'll Fix it whenever I get the free time . This does come with the 100w charger and adapter wall plug (new never opened- from when j bought the second p3p . And also comes with a used phantom 3 professional gl300b RC . I can include a battery if you need also .

Phantom 3 pro version w323a. RC gl300b.

Still has vision positioning system attached and the professional light ridge with antennas still in place


Like I said , can be sold as one package or if u need a specific piece in sure we can work out something . Everything must go !! Located in Louisiana. .

Comes with original oem box and paperwork.

Can be a working /flying bird again with the right parts and expertise . I just re shelled my second p3p and replaced tidbits here and there , although a length process , I must say - opening up the phantom is pretty fun and interesting - just make sure u have about 3-4 hours to burn.

Dji sent me and invoice for parts needs to have the phantom flying again . I'm sure some parts are not necessary whole others are imperative . Lol small history in the crash . Bird was csc st 160 ft up and fell upside down onto someone's front lawn . We are not going to get into politics about csc but it happened . The bird inverted upside down and fell like a rock and landed on its props onto grass from 160 ft up . The camera didn't actually take a physical impact yet separated from the phantom upon impact at the weakest spot (roll/yaw arm and also the ribbon cable .) No other obvious damage to 4K camera/gimbal and Dji only wanted 69$ for a new roll arm and 54$ for new ribbon cable was all that was quoted to repair the 4K gimbal camera and have it working again .

This would be the perfect buy for someone tech and mechanically savvy to rebuild /replace /repair or just to have as a handy parts bin
Make me an offer

50% off retail on each I was thinking
Make me an offer

50% off retail on each I was thinking
So you will take $30 plus shipping for the charger?
Is the shell useable?
 
200 plus the shipping for everything ?


Sent from my iPhone using PhantomPilots mobile app
 
So you will take $30 plus shipping for the charger?
Is the shell useable?
I'll take 40 plus shipping on the brand new charger and walk plug .


The shell isn't all that bad . The bird crashed upside down and fell and landed on the props in my front yard . The shell has some kinks and bends but nothing to bad . The bottom shell looks perfect. The top noticeable kinks around the seams The bottom shell is from when I re shelled my second p3p because the second p3p took damage to the lower shell and landing gear . $59 for the shell. If I was getting on a deal like this. A re shell would prolly be a must for me at least
 

Attachments

  • image.jpg
    image.jpg
    1.5 MB · Views: 456
if he doesn't i have plenty of those, complete setups without main board or just individual parts, just let me know what you need.
 
Hey how much for the RC? I'm particularly looking for the ribbon cable that goes from the main board to the com board if anybody has one :(
 

Members online

Forum statistics

Threads
143,066
Messages
1,467,358
Members
104,936
Latest member
hirehackers