New to the forum, got a p3a last week. Used to fly a lot of nitro RC years ago, and love the p3 so far.
I know similar issues have been discussed but I have not found an answer to this issue I have been having. After about 10 flights on my p3 this has happened on 3 flights, including the very first one:
While flying with full signal on the tx, video downlink, and great gps signal, I will look down to my app and I will see "no signal" indication on top and no video feed. There will show no GPS signal and if I recall correctly the battery and mode also say "N/A". Fortunately when this happens, I still have full control and the RTH works correctly, Also, if I tap the no signal to check the aircraft state, it shows normal
This happened on my very first flight which scared me obviously, but I was only about 30 meters high and 20 meters out so I landed it myself. The next time it happened was about flight 8. This time I immediately tested the RTH and it worked. I then closed the app and reopened it, and it was working normally again. However the third time it happened, closing the app did nothing, yet when I reopened it it still said no signal and no video, yet GPS showed 15 or so satellites and full tx and video strength .
I am almost certain this is an issue with the app, since it shows no signal, yet everything works fine and the aircraft state says normal. in addition, the app shows no gps yet, RTH still works fine. This is occurring on an iPhone 6 and I did already try to uninstall and reinstall the app, yet it happened again the next flight.
Anyone have this issue and a fix? DJI online support (which is terrible they take about 15 minutes for each chat reply) told me to try using an android device, no much help there.
Thanks!
I know similar issues have been discussed but I have not found an answer to this issue I have been having. After about 10 flights on my p3 this has happened on 3 flights, including the very first one:
While flying with full signal on the tx, video downlink, and great gps signal, I will look down to my app and I will see "no signal" indication on top and no video feed. There will show no GPS signal and if I recall correctly the battery and mode also say "N/A". Fortunately when this happens, I still have full control and the RTH works correctly, Also, if I tap the no signal to check the aircraft state, it shows normal
This happened on my very first flight which scared me obviously, but I was only about 30 meters high and 20 meters out so I landed it myself. The next time it happened was about flight 8. This time I immediately tested the RTH and it worked. I then closed the app and reopened it, and it was working normally again. However the third time it happened, closing the app did nothing, yet when I reopened it it still said no signal and no video, yet GPS showed 15 or so satellites and full tx and video strength .
I am almost certain this is an issue with the app, since it shows no signal, yet everything works fine and the aircraft state says normal. in addition, the app shows no gps yet, RTH still works fine. This is occurring on an iPhone 6 and I did already try to uninstall and reinstall the app, yet it happened again the next flight.
Anyone have this issue and a fix? DJI online support (which is terrible they take about 15 minutes for each chat reply) told me to try using an android device, no much help there.
Thanks!