OK, I've done the calibration but still I can't it turn on from RC. What else can I do?
I had my phone during the calibration, it's just that I don't have it right now in this moment.If you dont have a phone/tablet you couldn't have done RC calibration. Also motors won't start if there is compass error/interference which would show in Go app
Sent from my iPhone using PhantomPilots
I've calibrated my Remote controller with this tutorial:You calibrated your Remote controller or your Phantom?
I don't understand why you would have a red light on the controller but I don't own a P3.
Please tell us about the light sequence on the back lights of the phantom when you boot up your Phantom. Start from the beginning. Don't skip anything. Please be specific.
Welcome to the forum!, yes your information is very vague.2 of them are red all the time and 2 are blinking on yellow.
Thanks for Your tips. I will try to start from the bottom and I will let You know.Welcome to the forum!, yes your information is very vague.
#1 Have every got the motors to start?
if not, your never going to get anywhere without you phone hooked up and running the app.
#2 Have you registered your phantom with you phone?
If not that is another reason the motors don't start. DJI doesn't want you to just pull it out of the box and fly it before following certain steps and understanding how to fly. This can be a very dangerous product.
I do believe you are rushing into this with not enough knowledge. That's why we a picking up holes in your answers (skipping).
Take a look here..
DJI Phantom Accessories & Tips - Phantom Help
People have had to get stitches from cuts from those blades.
Rod