New Phantom 4 in Melbourne,FL

[MedicFL1]

Recently picked up the phantom 4 and loving it.
Made two mistakes so far that I didn't see on any video.
*There's a gray foam block that needs to be removed from the gimbal.
*There's a clear plastic film that needs to be removed above the gimbal.
Other than that I picked up the range reflectors which helped in my Samsung Tab A 8" screen transmission.
Also bought the Bower Lens set to help with the white out.
The gimbal went crazy today but stopped on its own a few minutes into flight.
So far, so good.

 

[msinger]

Welcome to Phantom Pilots!

 

[dirkclod]

Welcome to the forum Medic .
I hope you will find our site helpful and look forward to any input , photo's/video's you might post .
Don't be shy and ask anything if you can't find it by searching .
This bunch here are the smartest you will find anywhere

 

[Stephen027]

I also left the plastic sticker on above camera for my first flight but have removed it now. What was it actually for?


Sent from my iPhone using PhantomPilots

 

[MedicFL1]

I have actually seen it still on in drone videos (techtime) but my sense is that you remove it to allow for either the barometer or it knowing gimbal positioning.
Other than that, I have no idea.

I also left the plastic sticker on above camera for my first flight but have removed it now. What was it actually for?


Sent from my iPhone using PhantomPilots

 

[MedicFL1]

Thank you. I do have one quick question though.
My P4 came with a cracked lens cover, which I removed.
It appears to be a simple clear coat.
Is this something I should bring up with DJI ? Or simply let it go since I ordered the Bower Lens kit.

Welcome to the forum Medic .
I hope you will find our site helpful and look forward to any input , photo's/video's you might post .
Don't be shy and ask anything if you can't find it by searching .
This bunch here are the smartest you will find anywhere