- Joined
- Jan 21, 2016
- Messages
- 86
- Reaction score
- 17
- Age
- 40
I have a P3P, since buying I have updated all FW and done a compass calibration
I always check the IMU values before take off (along with battery temp/voltage etc)
I take off from my case which would not totally be level (it is on grass) the values I consistently get are
Gyro Mod = 0.01
Acceleration Mod = 1.00
Compass Range 1400-1550
Should I be concerned at a 0.01 variance on the Gyro ? I have read and most people say 0 so my question is how much difference does this value make. I have tried multiple surfaces which I believe to be level and I get the same set of values each time.
I always check the IMU values before take off (along with battery temp/voltage etc)
I take off from my case which would not totally be level (it is on grass) the values I consistently get are
Gyro Mod = 0.01
Acceleration Mod = 1.00
Compass Range 1400-1550
Should I be concerned at a 0.01 variance on the Gyro ? I have read and most people say 0 so my question is how much difference does this value make. I have tried multiple surfaces which I believe to be level and I get the same set of values each time.