Identifying Charged Battery Percent by Lights

[DeeX]

Could someone please tell me what each light means as far as percentage on the battery?
Has anyone here actually tested the percentages?
My main curiosity is what percent is two lights lit and the third one flashing?

Thanks!

 

[kndll]

solidly lit = 25% flashing = 12.5 % , example : 2 solid and one flashing = 62.5 %

 

[DeeX]

solidly lit = 25% flashing = 12.5 % , example : 2 solid and one flashing = 62.5 %

Thanks!

 

[DeeX]

solidly lit = 25% flashing = 12.5 % , example : 2 solid and one flashing = 62.5 %

I dont think this is 100% accurate. One of my batts was on 56% and it had two lights lit up with one flashing.

 

[Numone]

I dont think this is 100% accurate. One of my batts was on 56% and it had two lights lit up with one flashing.

Look at page 19 in the manual....

 

[kndll]

check the manual for detailed information , but if you can't here it is -- flashing 0% to 12.5 % solid 12.5% to 25% , four leds cannot display every % of battery , only need to worry about having full battery to fly on or 50% for storage state .

 

[DPD]

Are u guys referring to testing the batteries by holding down the power button on batt for 5 seconds, and then seeing what condition the batt is in as far as % goes. If that's the case, when I test mine I get 3 solid 1 blinking. When I first did this test I was worried that my battery was only going to charge to somewhere around 75% of its capacity, but even though I had 3 solid 1 blinking the batteries show 97% after full charge in the Go App. So I don't know how accurate that test is...


Sent from my iPad using PhantomPilots

 

[Vichian-Bruno]

holding down the power button on batt for 5 seconds

Pressing the power button for some seconds will indicate batteries life status.

 

[DanMan32]

7/8 life left

Sent from my HTC 10 using PhantomPilots mobile app