Horizon is not level

[TaylorSmithPhoto]

My Horizon is not level on my Zenmuse H3-2D GoPro Gimbal. it's about 3 degrees off. any help would be awesome! Thanks

 

[rfernandez]

First do a 6 point calibration, then check and make sure that the IMU under the pitch bar is perfectly straight and facing parallel.
if the IMU is tilted in any way it will never keep the camera straight

 

[EMCSQUAR]

First do a 6 point calibration, then check and make sure that the IMU under the pitch bar is perfectly straight and facing parallel.
if the IMU is tilted in any way it will never keep the camera straight

You can't perform a 6 pt calibration on a Zenmuse. It's factory set. Re: horizon level - you might try tightening down on corner(s) of rubber stabilizers w/zip ties or have your dealer warranty it.