It's a bit confusing how to install this update,so here is how it worked for me.
Here you can find the update:http://www.dji.com/product/phantom-2-vision-plus/download
It's named:
Phantom 2 Vision+ FC200 Firmware v1.3.0g
Unzip
1. Copy the “firmware.bin” file to the root folder of your Micro-SD card.
2. Insert the SD card into the camera before turning it on.
3. Turn on the camera.
4. The firmware update will begin automatically. A yellow flashing LED indicates that the camera is updating.
5. When the yellow flashing disappears, the firmware has been updated. After a successful update, the
“firmware.bin” file’s name will change to “firmware.bin.bak00”. This file can now be deleted.
If this is not working(like me),this is another way:update the camera to V1.3.0g following the steps above , rename the extracted file from firmware_plus_v1.3.0g.bin to firmware_plus.bin on the SD-Card.
Haven't got a change to see what's updated.