Re: DJI has released the new firmware v3.08 for Phantom 2 se
that would be nice
let's keep this topic for firmware 3.08
that would be nice
let's keep this topic for firmware 3.08
DJI has released the new firmware v3.08 for Phantom 2 series
- Thread starter DJI Innovations
- Start date
- Joined
- May 10, 2014
- Messages
- 3,012
- Reaction score
- 522
Re: DJI has released the new firmware v3.08 for Phantom 2 se
A little sensitive there I think. You've not ruined my day! I agree as its an issue not to do with 3.08, no big deal to start a new thread I would have thought. Stay cool.jaywoodz said:
Re: DJI has released the new firmware v3.08 for Phantom 2 se
I appreciate your expert opinion and contribution to this discussion.
BWJ said:
I appreciate your expert opinion and contribution to this discussion.
Re: DJI has released the new firmware v3.08 for Phantom 2 se
Almost...got caught by the irrelevant update !
Single LED Tx so v1.0.2.30 ain't for me but the upgrade assistant clearly can't tell :twisted:
* Update on dropouts - worked fine today 6-11-2014 too with revised start=up procedure. Testing continues !
Another update - worked fine AGAIN today 7-11-2014 too, PLUS...something V-E-R-Y interesting too, but will refrain from saying more until I'm sure, but a lot of people will like this
Almost...got caught by the irrelevant update !
Single LED Tx so v1.0.2.30 ain't for me but the upgrade assistant clearly can't tell :twisted:
* Update on dropouts - worked fine today 6-11-2014 too with revised start=up procedure. Testing continues !
Another update - worked fine AGAIN today 7-11-2014 too, PLUS...something V-E-R-Y interesting too, but will refrain from saying more until I'm sure, but a lot of people will like this
Re: DJI has released the new firmware v3.08 for Phantom 2 se
Im about to update to the latest firmware. So regarding the battery update, can i update it thru 3.6 and totally skip 3.4? After i upgrade the battery will it discharge it self after 2 days when fully charged with no use?
Im about to update to the latest firmware. So regarding the battery update, can i update it thru 3.6 and totally skip 3.4? After i upgrade the battery will it discharge it self after 2 days when fully charged with no use?
Re: DJI has released the new firmware v3.08 for Phantom 2 se
Ok and i can ignore 3.4? Will it take me to 3.6 when i connect it to the software on pc? My current software is 3.2
robinb said:
Ok and i can ignore 3.4? Will it take me to 3.6 when i connect it to the software on pc? My current software is 3.2
Re: DJI has released the new firmware v3.08 for Phantom 2 se
[/quote]
well 3.4 was released they had to change it to 3.6 due to a few bugs, so go straight to 3.6[/quote]
Ok thanks
[/quote]
well 3.4 was released they had to change it to 3.6 due to a few bugs, so go straight to 3.6[/quote]
Ok thanks
N017RW
Premium Pilot
Re: DJI has released the new firmware v3.08 for Phantom 2 se
Easily confused, the discharge itself takes about 2 days.
robinb said:
Easily confused, the discharge itself takes about 2 days.
Re: DJI has released the new firmware v3.08 for Phantom 2 se
I updated MC and P330CB to latest firmware through software 3.2, and the battery and zen through software 3.6. Dont know if i really needed to update zen since i dont have latest Tx. It said something that it makes i compatible with latest Tx.
But i updated anyway, and now the zen is slower on tilting, wich is a nice thing (I think i read somewhere that i can adjust the speed of the tilt in the software. True? If so where?)
Also now when im indoors after updating it all, I see i get 3-6 satellites, wich i did not get on 3.06, it always showed 0 satts indoors, but now its 3-6 so im curious if it will get more satts then usual when outside.
I connected the TX to its software to see if there was any updates for it, and there was but it says only for the new transmitter, so im guessing there is no need to update that latest Tx firmware since im still rocking the old Tx.
FYI, I am a phantom 2 vision plus owner.
I updated MC and P330CB to latest firmware through software 3.2, and the battery and zen through software 3.6. Dont know if i really needed to update zen since i dont have latest Tx. It said something that it makes i compatible with latest Tx.
But i updated anyway, and now the zen is slower on tilting, wich is a nice thing (I think i read somewhere that i can adjust the speed of the tilt in the software. True? If so where?)
Also now when im indoors after updating it all, I see i get 3-6 satellites, wich i did not get on 3.06, it always showed 0 satts indoors, but now its 3-6 so im curious if it will get more satts then usual when outside.
I connected the TX to its software to see if there was any updates for it, and there was but it says only for the new transmitter, so im guessing there is no need to update that latest Tx firmware since im still rocking the old Tx.
FYI, I am a phantom 2 vision plus owner.
- Joined
- May 2, 2014
- Messages
- 193
- Reaction score
- 1
- Age
- 63
Re: DJI has released the new firmware v3.08 for Phantom 2 se
DJI must have fixed something with the battery thresholds with this update. After updating to v3.08 and updating all of my batteries from v2.0 to 2.6, three of my older batteries that were giving me issues are now working fine.
Example: P2NV
My worst battery was showing 10.7 volts @ 70% and showing the warning red leds after hard acceleration.
Now:
Although the voltage is dropping all the way to 10.5 at 30% and the leds blink red in hard acceleration, it never went into autoland until the battery was all the way down to 15%.
I am now back to 8 batteries.
DJI must have fixed something with the battery thresholds with this update. After updating to v3.08 and updating all of my batteries from v2.0 to 2.6, three of my older batteries that were giving me issues are now working fine.
Example: P2NV
My worst battery was showing 10.7 volts @ 70% and showing the warning red leds after hard acceleration.
Now:
Although the voltage is dropping all the way to 10.5 at 30% and the leds blink red in hard acceleration, it never went into autoland until the battery was all the way down to 15%.
I am now back to 8 batteries.
Re: DJI has released the new firmware v3.08 for Phantom 2 se
Had the 'not enough power to return to home point' message again. Getting paranoid flying this thing at the moment
Im assuming others have done it but Im going to fire off an email to DJI asking them to fix it.
Had the 'not enough power to return to home point' message again. Getting paranoid flying this thing at the moment
Im assuming others have done it but Im going to fire off an email to DJI asking them to fix it.
Re: DJI has released the new firmware v3.08 for Phantom 2 se
Please, do. Keep us informed about the progress.
Cyclone said:Had the 'not enough power to return to home point' message again. Getting paranoid flying this thing at the moment
Im assuming others have done it but Im going to fire off an email to DJI asking them to fix it.
Please, do. Keep us informed about the progress.
Similar threads
