Hi guys!
I just bought and built a DJI F550. Sadly, I have to sell it. Below is description and pictures! I'm looking for $700 but I am willing to take the best offer!
This is a RTF (Ready to Fly) DJI F550. It is ready to fly but the only thing missing is a few FPV components. To make this a complete FPV hex, you would need an iosd mini (soldering and wiring is complete, just plug in the iOSD and poof, complete) along with a 5.8 ghz FPV monitor. Besides that, a powerful lipo battery and this is a complete drone. The battery would need to way about 350 grams to balance the hexacopter. The drone is completely functional and working/able to fly.
As I said before, it is pretty much "completely loaded". It connects you your iPad via Ground Station. The gimbal works great with tilt already working with the paired receiver. The controller is also nice. It has a color display and has already been configuration with the drone. I had programmed the gimbal tilt and the 3 modes (GPS, ATTI, FS). Finally, listed below is specific components.
The drone has hardly been flown: only flown to test that it is calibrated and working and flying fine. I also have a pair of retractable landing gear that I was originally going to install but decided the weight and flight time outweighed the advantages. The landing gear is Tarot Landing gear with servo wires. It connects to the receiver with a Y servo cable (all included).
Reason for selling: I wanted to build a drone and I had an absolute blast building it but I have realized I am actually going to upgrade to a more compact drone for easier travel. Overall, this is really close to a brand new machine with some awesome possibilities and unbelievable functionality.
Components
Stock Aircraft with Naza M V2
Frame (2 Red and 4 White)
Esc's (420 Lite)
Motors (2312 E)
Props
Naza V2
PMU V2
GPS
LED Module
RX and TX
Radio link AT9
Gimbal
Feiyu Tech Gimbal (~350 grams)
Gimbal Rail was 3D Printed (Strong and stable)
Close to Full FPV Setup
FatShark Transmitter (With a hard shell case)
PnP FPV Cable
DJI iPad Ground Station
Can Hub
Datalink Station
Bluetooth Ground Station
Landing Gear
DJI Stock landing gear (installed)
eBay Standard (Separate but can be installed)
Y Servo Converter Cable
Misc.
Some spare screws, cables, & battery strap
Sent from my iPhone using PhantomPilots mobile app
I just bought and built a DJI F550. Sadly, I have to sell it. Below is description and pictures! I'm looking for $700 but I am willing to take the best offer!
This is a RTF (Ready to Fly) DJI F550. It is ready to fly but the only thing missing is a few FPV components. To make this a complete FPV hex, you would need an iosd mini (soldering and wiring is complete, just plug in the iOSD and poof, complete) along with a 5.8 ghz FPV monitor. Besides that, a powerful lipo battery and this is a complete drone. The battery would need to way about 350 grams to balance the hexacopter. The drone is completely functional and working/able to fly.
As I said before, it is pretty much "completely loaded". It connects you your iPad via Ground Station. The gimbal works great with tilt already working with the paired receiver. The controller is also nice. It has a color display and has already been configuration with the drone. I had programmed the gimbal tilt and the 3 modes (GPS, ATTI, FS). Finally, listed below is specific components.
The drone has hardly been flown: only flown to test that it is calibrated and working and flying fine. I also have a pair of retractable landing gear that I was originally going to install but decided the weight and flight time outweighed the advantages. The landing gear is Tarot Landing gear with servo wires. It connects to the receiver with a Y servo cable (all included).
Reason for selling: I wanted to build a drone and I had an absolute blast building it but I have realized I am actually going to upgrade to a more compact drone for easier travel. Overall, this is really close to a brand new machine with some awesome possibilities and unbelievable functionality.
Components
Stock Aircraft with Naza M V2
Frame (2 Red and 4 White)
Esc's (420 Lite)
Motors (2312 E)
Props
Naza V2
PMU V2
GPS
LED Module
RX and TX
Radio link AT9
Gimbal
Feiyu Tech Gimbal (~350 grams)
Gimbal Rail was 3D Printed (Strong and stable)
Close to Full FPV Setup
FatShark Transmitter (With a hard shell case)
PnP FPV Cable
DJI iPad Ground Station
Can Hub
Datalink Station
Bluetooth Ground Station
Landing Gear
DJI Stock landing gear (installed)
eBay Standard (Separate but can be installed)
Y Servo Converter Cable
Misc.
Some spare screws, cables, & battery strap
Sent from my iPhone using PhantomPilots mobile app
