- Joined
- Oct 16, 2015
- Messages
- 548
- Reaction score
- 123
- Age
- 58
Today I tried to update the FW of my P3A to V01.09
I formatted by SD card (32 Mb) and put on the new package, P3S_FW_V01.09.0060.
I noticed that it took a long time during which the red light frequently turned on and I heard several different beeps. After 36 min the P3 made a continuous beep. I waited for a minute or 2 and then turned it off.
When I turned it on, it made very loud beeps. I turned it off and on again. I seemed it took long before it turned off and also the red light of the battery stayed on longer. This was in the log:
========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3S_FW_V01.08.0080.bin
Upgrading ...
Result: Success.
========== 2016.05.21 17:25:34 =====================
Packet: P3S_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3S_FW_V01.09.0060.bin
Upgrading ...
To be sure I switched batteries (both were full) and turned it on. It made strange warning? beeps.
I turned it off and tried turned it on again. This time the same beeps and also the gimbal moved strangely. See
I left it on and to my surprise the upgrade finished. This was the log:
========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3S_FW_V01.08.0080.bin
Upgrading ...
Result: Success.
========== 2016.05.21 17:25:34 =====================
Packet: P3S_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3S_FW_V01.09.0060.bin
Upgrading ...
Result: Corrupted.
Firmware bin file is corrupted, download it again from the DJI offical website.
========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3S_FW_V01.09.0060.bin
========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3S_FW_V01.09.0060.bin
Upgrading ...
Result: Success.
========== 2016.06.18 17:43:13 =====================
Packet: P3S_FW_V01.09.0060.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
========== 2016.06.18 17:45:18 =====================
Packet: P3S_FW_V01.09.0060.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
Does anyone have any idea what went wrong? Was there a problem with my SD-card?
Why was was the date in the log from 2014?
The first log file was created today, but modified in 2013 (2013-12-31 23:00)
The second had the correct dates.
I formatted by SD card (32 Mb) and put on the new package, P3S_FW_V01.09.0060.
I noticed that it took a long time during which the red light frequently turned on and I heard several different beeps. After 36 min the P3 made a continuous beep. I waited for a minute or 2 and then turned it off.
When I turned it on, it made very loud beeps. I turned it off and on again. I seemed it took long before it turned off and also the red light of the battery stayed on longer. This was in the log:
========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3S_FW_V01.08.0080.bin
Upgrading ...
Result: Success.
========== 2016.05.21 17:25:34 =====================
Packet: P3S_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3S_FW_V01.09.0060.bin
Upgrading ...
To be sure I switched batteries (both were full) and turned it on. It made strange warning? beeps.
I turned it off and tried turned it on again. This time the same beeps and also the gimbal moved strangely. See
I left it on and to my surprise the upgrade finished. This was the log:
========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3S_FW_V01.08.0080.bin
Upgrading ...
Result: Success.
========== 2016.05.21 17:25:34 =====================
Packet: P3S_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3S_FW_V01.09.0060.bin
Upgrading ...
Result: Corrupted.
Firmware bin file is corrupted, download it again from the DJI offical website.
========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3S_FW_V01.09.0060.bin
========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3S_FW_V01.09.0060.bin
Upgrading ...
Result: Success.
========== 2016.06.18 17:43:13 =====================
Packet: P3S_FW_V01.09.0060.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
========== 2016.06.18 17:45:18 =====================
Packet: P3S_FW_V01.09.0060.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
Does anyone have any idea what went wrong? Was there a problem with my SD-card?
Why was was the date in the log from 2014?
The first log file was created today, but modified in 2013 (2013-12-31 23:00)
The second had the correct dates.