Check out this Phantom 3 iPad Mini Sunshade

[Revivalution]

Hi Everyone,

I developed this for Inspire 1 owners and found that it is going to work well for Phantom 3 Owners with an iPad as well. When searching online I found plenty of softshell flimsy Sunshades but no collapsable hard sided sunshades. Thus the reason for this. This sunshade was made to assemble in seconds and then breakdown fit inside of itself and fit inside of the stock Inspire 1 case. Hopefully it will fit inside of the stock phantom case (if there is one). The cost is $79.99 with a 12" Lightning Cable (a $20 Value) and is found along with several of our other items at:

http://aerialdroneaccessories.com

Get 10% off with the coupon code "10off" through Friday June 12, 2015.

We have several other needed items on our site as well so please be sure to take a look around.

Please take a look and give us your thoughts.

 

[dysan911]

It would be great if you could make a video of how to set it up and use it and then the break down and storage.

 

[Revivalution]

Here is a quick one we did showing it packed away and then assembled. Thanks for the input I'll do a better one giving more detailed instructions. For now though check this out:

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

 

[Revivalution]

It would be great if you could make a video of how to set it up and use it and then the break down and storage.

Awe the video. This shows assembly. I'll do a better one for you guys later.

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies