Calibrate IMU

[KingDad1985]

Everytime I go to fly it tells me to calibrate the IMU. The gyro values are in the red. After a minute or two the calibrate notification goes away and the values start to lower slowly. I wait a few more minutes while watching the gyro values lower into the green .01 - .04 then I take off. Anyone else seeing this?

Sent from my SAMSUNG-SM-G935A using PhantomPilots mobile app

 

[KingDad1985]

Here is right after the calibrate Imu notification goes away and it is ready to fly



Here is around 3 minutes after its ready to fly


Sent from my SM-T710 using PhantomPilots mobile app

 

[F3honda4me]

You need to calibrate the IMU with the craft being cold. Put it in a fridge or freezer for 15 mins then immediately calibrate IMU.

 

[KingDad1985]

You need to calibrate the IMU with the craft being cold. Put it in a fridge or freezer for 15 mins then immediately calibrate IMU.

Can I leave it outside say in my car for a little then bring it inside and do acalibration? I'm also worried about condensation either way I do it, is that a big possibility?

Sent from my SAMSUNG-SM-G935A using PhantomPilots mobile app

 

[KingDad1985]

You need to calibrate the IMU with the craft being cold. Put it in a fridge or freezer for 15 mins then immediately calibrate IMU.

It's 44 f degrees out. Would I leave the battery inside the aircraft while it's outside or leave the battery inside the house and only put the aircraft outside to chill?

Sent from my SAMSUNG-SM-G935A using PhantomPilots mobile app

 

[F3honda4me]

Battery keep inside. Outside 44F is fine but if you ever fly in a temp colder than that you'll run into this again