Balance rod for Phantom 4

[Mofroggy]

I just found out that you can get a really high precision prop balance rod especially designed for the Phantom 4 props from www.rcpilotsupply.com. They are great folks to deal with and the price includes the shipping!
Ira

 

[msinger]

Do you have one? If so, how do you like it?

 

[Joe Lester]

Do you have one? If so, how do you like it?

Yes, I have one, the rod is ultra smooth and the fit in the prop is perfect. I got the whole system, The Speedy prop balancer and PBR-4 rod combo.They ship fast too!

 

[msinger]

Got a photo? I'm just wondering what it looks like.

 

[Joe Lester]

I don't have a photo but you can go to www.rcpilotsupply.com and see photos of the system.
They have them for the Phantom 1,2,3 and 4 and a bunch of other quads.

 

[msinger]

No worries. I thought maybe you could snap one since you own one.

I double-checked and see they have a photo. I guess I missed it the first time I visited.

 

[Joe Lester]

I am 71 years old, I know how to take photos but I don't know how to upload them (yet!) but I am working on that:>)

 

[John Locke]

They don't have a very good photo of the P4 rod that shows the retaining fingers. I wish they had a better close up.

 

[msinger]

What are retaining fingers?

 

[thunderbird]

What the balancer does anyway and why props need balancing, sorry, noob question

 

[WWK888]

Think of a wheel being out of balance on a car or if the drive shaft is out of balance. You will get a vibration that will affect performance and video quality.


Sent from my iPad using PhantomPilots mobile app

 

[thunderbird]

ah ok

 

[Cale262]

I just use the rod that comes with the Dubro balancer, fits almost as if it were made exactly for the P4 prop.

 

[johnbowen]

Do u find that your props are out of balance? I was under the impression that the -p4 props are made to a high tolerance and are well balanced from the factory.

 

[msinger]

About half of my P4 props were a little off balance. That's been the usual for all of the Phantoms I've purchased in the past though.

 

[Mofroggy]

The Speedy Prop Balance rod I bought for the Phantom 4 is made to perfectly fit the center hole in the props. I tried my Dubro rod and it was kind of sloppy and hey, for $11.00 delivered how can you go wrong:>)

 

[darbyhouse]

If out of balance, then what? Add scotch tape to the blade at various points until in balance like you do with a ceiling fan blade? Lol.

Half joking.....


Sent from my iPhone using PhantomPilots mobile app

 

[Cale262]

The Speedy Prop Balance rod I bought for the Phantom 4 is made to perfectly fit the center hole in the props. I tried my Dubro rod and it was kind of sloppy and hey, for $11.00 delivered how can you go wrong:>)

You and I must've gotten different rods with the Dubro...Mine is tight in the middle of the prop hole, tight enough that I can even hear the air being displaced when i put it in and suction when I pull it out...

 

[Sim597]

I was going to buy one, but when some of these guys I respect a LOT, who have many hours and Inspire's and P2/3/4s tell of DJI having excellent prop tooling and making process, I declined, and coming from a RC airplane hobby back in the day, you'd never think of flying your plane without balancing the prop.

 

[Sim597]

If out of balance, then what? Add scotch tape to the blade at various points until in balance like you do with a ceiling fan blade? Lol.

Half joking.....


Sent from my iPhone using PhantomPilots mobile app

That's exactly how you balance them, tiny piece of tape, or with wood ppl used to sand a little off one side, you can also do this with plastic, I dunno, I'd like to be sure, but until I see problems, I have to take for granted that they're pretty well balanced at factory. Some guys said every prop they tested was balanced and no longer even test them.