Hi guys, new Phantom 2 V3 owner here. I have the Zenmuse, but haven't attached it yet to the copter. All my firmware is up to date. Compass calibration works fine. IMU calibrated fine. Running in Phantom mode, I get 4-6 slow green blinks, and then rapid red flashing. Today I took a chance and flew it at less than 25 feet. It hovers well, quite stable, and self-corrected for wind pretty well. But even after being airborne for 10 or more minutes, my LEDs are still doing that sequence. I can't find any reference to this, so I'm wondering if anyone can give me some clues on what might be going on. I'm afraid to take it any higher or farther until this is resolved.
Many thanks
Many thanks