repair

Wow.... after reading so much about these it's finally come to me. Just discovered two stress cracks under the rear motors, one in each. They are fine cracks but I can tell that they wan't to come apart with a little bit of pulling. Ok... Bought mine from Amazon about 2 months ago. The cracks...

Any of you have any suggestions to the cause? I sent it in to DJI and they said "Phantom did not malfunction, root of the cause was user error. It hit something midflight causing the Phantom 3 to crash down". However, it was in LOS the whole time and it never hit anything then all of a sudden...

Are these repairs justified???? Ok, so I started out a year ago with a P2, the first week I had it, it flew away, I had calibrated it, it was not very far away when it headed south.... I did everything correct. DJI was then coming out with their P3s so they offered me a P3 at $500. I decided to...

Hello, I'm from India, had crashed by DJI Phantom 3 Pro, gimble took a hit. As per DJI support and Guide, have sent it to China, as guided in the support mail. On Nov 10, have received a confirmation from DJI support that they have received the gimble camera and repair in progress and they...

FYI, I owned my P3P for 1.5 months before I noticed very slight shell cracks in the typical screw holes. I contacted DJI by phone and created a ticket. Yes I was on hold for quite a while to get through. DJI sent me a shipping label for free and I shipped it. Received 2-3 days later and I...

Hello, I had a hard landing with my modded Phantom 2 Vision. I have checked everything out and all components seem to be okay. I need the shell replaced. This will require some additional work due to the pentalobe antenna on the UAV (see attached photo). In addition I would like to ensure that...

I've been flying almost exclusively over water for the last several months filming some boat races & wakeboarding among other things. There have been two incidents worth sharing. Once into fresh water in New Zealand. In this case, it the Phantom off 18 seconds into a flight during a takeoff at...

Looking for some advice on how to repair a motor that is tilted slightly inward after a tree/ground interface. :) When my P3Pro crashed it landed directly on the front left rotor arm. The plastic body/shell now has a slight deformation before the motor right at the seam on the lower half of the...

Totally new to the drone scene. I had a rough landing trying out my phantom 2. Sparks and funny smells emanated from one leg, and now a motor won't turn. I've researched it and I am pretty sure it's either the motor or the ESC. What I don't know is what ESC to order. Everything I see says it's...

Thought of starting a thread showing prices of DJI repairs. This way folks could know what the part cost (minus the labor) is going to be ahead of time before sending unit in. All prices in USD please. Top cover kit: $5.00 Bottom cover kit: $8.00 Left landing gear kit: $4.00 HD camera/gimble...