I am looking for someone to install a thermal or multispectral camera on my p4 advance. I am looking to use it for animal rescue, we have a farm with cattle when calving, sometime, Mama doesn't do a good job at bringing them in. Thanks
Thermal imaging
- Thread starter ajr
- Start date
A while back I did design and 3D print a mounting bracket and leg extenders to add on a thermal camera, with gimbal. Technically it did work, but the camera and gimbal I wanted to use were just a bit too heavy. It did fly, but the flight time was dramatically reduced and I didn't feel it was as stable as I wanted. However, if you had a lesser, lighter thermal camera, and maybe didn't use a gimbal, or a lighter gimbal (since the camera would be lighter), it may fly better.
I also had a video transmitter and receiver for the other controller I used to control the camera and gimbal. So again, if you went a little more spartan, you wouldn't need as much extra gear on there.
This was on a P4A.
Andy
I also had a video transmitter and receiver for the other controller I used to control the camera and gimbal. So again, if you went a little more spartan, you wouldn't need as much extra gear on there.
This was on a P4A.
Andy
suas.com has solutions for the Phantom.
www.suas.com
But, a Mavic 2 Enterprise Advanced or Autel Evo 2 640T offer very high resolution in a streamlined, integrated package for just under $7,000.
The Mavic 2EA also comes with complimentary Enterprise Shield replacement.
Products | suas
www.suas.com
But, a Mavic 2 Enterprise Advanced or Autel Evo 2 640T offer very high resolution in a streamlined, integrated package for just under $7,000.
The Mavic 2EA also comes with complimentary Enterprise Shield replacement.
Very true. In my case, I already had an expensive thermal camera and also didn't want to get a very expensive new drone. I opted for a Yuneec H520E hexacopter for less than half that, and have the camera mounted on it. Working fine.
Similar threads
